MX20
3Pages

ADCA STEAM - WATER MIXERS MX20 DESCRIPTION The ADCAMix MX20 is a series of steam/water mixers designed to provide a cheap and instantaneous source of low pressure hot water, by using existing steam and cold water supplies. The mixer incorporates a safety device, to ensure that live steam cannot be accidentally ejected even if, for some reason, the cold water supply fails. The water temperature at the outlet of the ADCAMix is easily controlled by using water and steam valves fitted at the inlets. MAIN FEATURES Instant source of low pressure hot water. Safety device against accidental steam ejection. Non return valves included. Complete stainless steel construction. Quiet operation. OPTIONS AND ACCESSORIES: Alternative steam valve if live steam spraying is required, e.g. for sterilisation. Stainless steel pedestal. Adjustable spray gun. Steam/water inlet valves. Hot water/steam hose. Stainless steel suspension for hose. Saturated steam and cold water. AVAILABLE MODELS: Vertical wall installation. See IMI – Installation instructions. FLOW RATE CAPACITY – HOT WATER FLOW (L/h) STEAM PRESSURE (bar) 2,5 HOT WATER OUTLET TEMPERATURE 70 ºC VALSTEAM ADCA LIMITING CONDITIONS Minimum operating steam pressure Maximum operating steam pressure 10 bar Remarks: Steam pressure must not exceed more than 3 times the water pressure. The water pressure cannot be higher than the steam pressure. We reserve the right to change the design and material of this product without notice.

Stainless steel support for hose G P Stainless steel pedestal Pedestal base DIMENSIONS (mm) VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Steam body Water body * Steam valve * Valve spring Steam cover Water cover Steam valve Steam nozzle Mixing chamber * Check valve * Available spare parts. TECHNICAL DATA (HOSE) Tube materials NBR rubber, clear colour, food quality, odourless, tasteless, smooth, mirror-like. Complies with FDA standards, BfR recommendations and M.D. 21/03/73 and following amendments. Cover materials NBR rubber, blue colour, abrasion, ozone and weather resistant, smooth, cloth finish. Reinforcement materials Temperature range Heat resistant synthetic textile plies. From –20 ºC to 95 ºC. Up to 164 ºC for...