M3HP
6Pages

Catalog excerpts

ADCA HIGH PURITY BALL VALVES M3HP (1/2" to 2" – DN 10 to DN 50) DESCRIPTION The ADCAPure M3HP three piece body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as a control valve and should only be used as an isolating valve, fully open or fully closed. The product is mainly designed for the pharmaceutical, biotech, semiconductor, cosmetics, fine chemical and food & beverage industries. MAIN FEATURES True bore floating ball design. Completely made from solid bar stock material. Can be serviced without removal from the pipeline. Bidirectional. Antistatic device. Anti blow out proof stem. Tube weld with loose body flanges (360º rotation after installation). ISO 5211 mounting (with adapter for sizes below 1" and DN 20). STANDARD SURFACE FINISH Internal wetted parts: ≤ 0,51 µm Ra – SF1. External : ≤ 0,76 µm Ra – SF3. Other surface conditions see TIS.GIA – General information ADCAPure. Ultrasonic cleaning. OPTIONS: ISO 5211 mounting with flange adapter for sizes below 1" and DN 20. Degreased for oxygen use. Cavity fillers. Lever with locking system. For more options and extras, please consult IS M3H.100 – Sanitary Ball Valves Additional Options and Extras. Clean steam, gases and liquids compatible with the construction. AVAILABLE MODELS: M3HP – complete bar stock construction. ASME BPE or DIN clamp ferrules, tube weld (ETO) ends or a combination of both. Others on request. Assembling and packaging in a clean room certified according to ISO 14644-1. The product is end capped and sealed with recyclable thermo-shrinkable plastic film, to avoid contamination. VALSTEAM ADCA CE MARKING – GROUP 2 (PED - European Directive) PN 63 We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

ADCA PRESSURE / TEMPERATURE LIMITS 1/2" to 1" DN 10 to 20 Tube weld easy and quick installation Remark: Maximum operating conditions may be limited by the valve end connections due to normative restrictions. Valves with tube weld (ETO) connections are fitted, as standard, with loose body flanges which allow installation with no need to align the end connections. After installation the valve can rotate freely 360º to the desired orientation. LEVER OPTIONS ROUND LEVER FLAT LEVER FLAT LEVER WITH LOCKING SYSTEM STEM EXTENSION UNITS * SEF/H *Consult IS M3H.100 – Sanitary Ball Valves Additional...

Open the catalog to page 2

DIMENSIONS – ASME BPE (mm) BALL ISO WGT. PORT 5211 (kg) * Flange adapter option is required. See IS M3H.100 – Sanitary Ball Valves Additional Options and Extras. DIMENSIONS – DIN (mm) SIZE * Flange adapter is required. See IS M3H.100 – Sanitary Ball Valves Additional Options and Extras. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 3

ADCA MATERIALS Optional flat lever with locking system VALSTEAM ADCA Optional ISO 5211 mounting with flange adapter (only for sizes 1/2" and 3/4" – DN 10 and DN 15) We reserve the right to change the design and material of this product without notice.

Open the catalog to page 4

Valve body Clamp ferrule end connection Tube weld end connection * Valve ball * Standard seat * Cavity filler seat * Body seal * Stem seals * Stem thrust seal Handle body Locking piece Spring washers Lock washer Body fixing bolts Handle stopper Locking flange Handle fixing bolt Antistatic device Fixing bolts Flange adapter Fixing bolt * Available spare parts. Remarks: FDA / USP Class VI seals certificate on request. All valves have a serial number. In case of non-standard valves, this number must be supplied if spare parts are ordered. VALSTEAM ADCA We reserve the right to change the design...

Open the catalog to page 5

ADCA ORDERING CODES M3HP Valve model M3HP – AISI 316L / 1.4404 three pieces ball valve Lever handle Round lever in stainless steel with plastic end Round lever with complete stainless steel construction Flat lever in stainless steel with plastic cover Flat lever in stainless steel with plastic cover and locking system Bare stem AISI 316L / 1.4404 Seat design Standard seats Cavity fillers TFM 1600 Surface finish a) Standard surface finish Mirror mechanical polished external surfaces (SF1) Electropolished internal wetted parts (SF5) Condensate drain connection – Clamp ferrule b) Condensate...

Open the catalog to page 6

M3HP 6Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

M3HP
6Pages