M3H TRUE BORE
5Pages

Catalog excerpts

ADCA HYGIENIC BALL VALVES M3H TRUE BORE (1/2" to 2" – DN 10 to DN 50) DESCRIPTION The ADCAPure M3H three pieces body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as a control valve and should only be used as an isolating valve, fully open or fully closed. The product is mainly designed for the pharmaceutical, biotech, semiconductor, cosmetics, fine chemical and food & beverage industries. MAIN FEATURES True bore floating ball design. A351 CF3M body and ends with ferrite content of less than 2% and low sulphur between 0,005 and 0,017%. Can be serviced without removal from the pipeline. Tube weld with loose body flanges (360º rotation after installation). Bidirectional. Antistatic device. Anti blow out proof stem. ISO 5211 mounting. STANDARD SURFACE FINISH Internal wetted parts: ≤ 0,51 µm Ra – SF1. External: as casted. Other surface conditions see TIS.GIA – General information ADCAPure. Ultrasonic cleaning. OPTIONS: Different sealing materials. Degreased for oxygen use. Cavity fillers. Lever with locking system. For more options and extras, please consult IS M3H.100 – Sanitary Ball Valves Additional Options and Extras. Clean steam, gases and liquids compatible with the construction. AVAILABLE MODELS: ASME BPE or DIN clamp ferrules, tube weld (ETO) ends or a combination of both. Others on request. Assembling and packaging in a clean room certified according to ISO 14644-1. The product is end capped and sealed with recyclable thermo-shrinkable plastic film to avoid contamination. VALSTEAM ADCA CE MARKING – GROUP 2 (PED - European Directive) PN 63 We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

ADCA PRESSURE / TEMPERATURE LIMITS 1/2" to 1" DN 10 to 20 Tube weld easy and quick installation Remark: Maximum operating conditions may be limited by the valve end connections due to normative restrictions. Valves with tube weld (ETO) connections are fitted, as standard, with loose body flanges which allow installation with no need to align the end connections. After installation the valve can rotate freely 360º to the desired orientation. LEVER OPTIONS FLAT LEVER FLAT LEVER WITH LOCKING SYSTEM STEM EXTENSION UNITS * SEF/H *Consult IS M3H.100 – Sanitary Ball Valves Additional Options and...

Open the catalog to page 2

DIMENSIONS – ASME BPE (mm) SIZE BALL PORT BALL PORT VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 3

Optional flat lever with locking system MATERIALS POS. Nº Valve body Clamp ferrule end connection Locking piece Tube weld end connection Spring washers * Valve ball * Standard seat Lock washer * Cavity filler seat Body fixing bolts * Body seal * Stem seals Locking flange * Stem thrust seal Antistatic device Fixing bolts * Available spare parts. Remarks: FDA / USP Class VI seals certificate on request. All valves have a serial number. In case of non-standard valves, this number must be supplied if spare parts are ordered. VALSTEAM ADCA We reserve the right to change the design and material...

Open the catalog to page 4

ADCA ORDERING CODES M3H Valve model M3H – A351 CF3M / 1.4409 3 pieces ball valve Lever handle Flat lever in stainless steel with plastic cover Flat lever in stainless steel with plastic cover and locking system Bare stem A351 CF3M / 1.4409 Seat design Standard seats Cavity fillers TFM 1600 Surface finish a) Standard surface finish Electropolished internal wetted parts (SF5) Condensate drain connection – Clamp ferrule b) Condensate drain connection – Tube weld (ETO) b) Clamp ferrule ASME BPE Tube weld (ETO) according to ASME BPE Tube weld (ETO) according to DIN 11866-A (DIN 11850-2) TC/ETO...

Open the catalog to page 5

M3H TRUE BORE 5Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

M3H TRUE BORE
5Pages