Catalogs >
VALSTEAM ADCA Engineering S.A. >
M3H TRUE BORE (6")

M3H TRUE BORE (6")
4Pages

Catalog excerpts

ADCA HYGIENIC BALL VALVES M3H TRUE BORE (6") DESCRIPTION The ADCAPure M3H three piece body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as a control valve and should only be used as an isolating valve, fully open or fully closed. The product is mainly designed for the pharmaceutical, biotech, semiconductor, cosmetics, fine chemical and food & beverage industries. MAIN FEATURES Full bore floating ball design. A351 CF3M body and ends with ferrite content of less than 2 % and low sulphur between 0,005 and 0,017 %. Can be serviced without removal from the pipeline. Tube weld with loose body flanges (360º rotation after installation). Bidirectional. Antistatic device. Anti blow out proof stem. ISO 5211 mounting. STANDARD SURFACE FINISH Internal wetted parts: ≤ 0,51 µm Ra – SF1. External: as casted. Other surface conditions see TIS.GIA – General information ADCAPure. Ultrasonic cleaning. OPTIONS: Different sealing materials. Degreased for oxygen use. Gearboxes. Cavity fillers. For more options and extras, please consult IS M3H.100 – Sanitary Ball Valves Additional Options and Extras. Clean steam, gases and liquids compatible with the construction. AVAILABLE MODELS: ASME BPE clamp ferrules, tube weld (ETO) ends or a combination of both. Others on request. Assembling and packaging in a clean room certified according to ISO 14644-1. The product is end capped and sealed with recyclable thermo-shrinkable plastic film, to avoid contamination. VALSTEAM ADCA CE MARKING – GROUP 2 (PED – European Directive) PN 16 We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

ADCA PRESSURE / TEMPERATURE LIMITS 1/2" to 1" DN 10 to 20 Tube weld easy and quick installation Remark: Maximum operating conditions may be limited by the valve end connections due to normative restrictions. Valves with tube weld (ETO) connections are fitted, as standard, with loose body flanges which allow installation with no need to align the end connections. After installation the valve can rotate freely 360º to the desired orientation. BALL PORT VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 2

Valve body Clamp ferrule end connection Tube weld end connection * Valve ball * Standard seat * Cavity filler seat Body ring * Body seal * Stem seals * Stem thrust seal Handle body Spring washer Lock washer Body fixing bolts Handle stopper Handle fixing bolt Antistatic device * Available spare parts. Remarks: FDA / USP Class VI seals certificate on request. All valves have a serial number. In case of non-standard valves, this number must be supplied if spare parts are ordered. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 3

ADCA ORDERING CODES M3H Valve model M3H – A351 CF3M / 1.4409 3 pieces ball valve Lever handle Round lever with complete stainless steel construction Bare stem Standard seats Cavity fillers Seat material Standard surface finish Electropolished internal wetted parts (SF5) Special features None TC – Sanitary clamps ASME BPE ETO – Extended tube orbital welding ASME BPE (360º rotation design) TC / ETO – Combination ASME BPE (360º rotation design) Ball port True bore Size 6" Special construction / Additional options Full description or additional codes have to be added in case of a non standard...

Open the catalog to page 4

M3H TRUE BORE (6") 4Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

M3H TRUE BORE (6")
4Pages