ISC20i
6Pages

Catalog excerpts

CULINARY STEAM FILTERS ISC20i and ISC20i2 DESCRIPTION The ISC20i and ISC20i2 high efficiency filters are used to remove contaminated particles from gases such as steam and compressed air. The optimized construction of these units offers low differential pressure at high flow rates. All sizes are built in two halves, with 1/4" to 3" being joined by a sanitary clamp ferrule according to DIN 32676 Series A. Whereas 4" to 6" are joined by bolts and nuts. All sizes include plugged drain and vent connections. The replaceable filter elements are made of sintered austenitic stainless steel and available with 1, 5 or 25 micron absolute rating. MAIN FEATURES Several retention rates available. Good durability against aggressive gases. Porosity level above 50% to ensure high particle and dirt load capacity as well as high flow rates at a low differential pressure. Regeneration by ultrasonic cleaning. STANDARD SURFACE FINISH Internal wetted parts upstream of filter elements: ≤ 1,6 µm Ra for model ISC20i. As casted for model ISC20i2. Internal wetted parts downstream of filter elements: ≤ 0,76 µm Ra – SF3, for all models. External: Satin bead blast finish. As casted body for model ISC20i2. Other surface conditions see TIS.GIA – General information ADCAPure. USE: AVAILABLE MODELS: RETENTION RATES: Steam, compressed air and other gases. ISC20i – AISI 316L / 1.4404 stainless steel. ISC20i2 – CF8M / 1.4408 body and AISI 316L / 1.4404 cover. 1, 5 and 25 micron. Female threaded ISO 7 Rp or NPT. Tube weld (TW). Flanged EN 1092-1 PN 16. Flanged ASME B16.5 Class 150. Others on request. Horizontal installation with the drain connection pointing downwards. See IMI – Installation and maintenance instructions. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

CE MARKING – GROUP 2 (PED – European Directive) Ps 16 bar LIMITING CONDITIONS * Maximum allowable pressure Maximum allowable temperature Minimum allowable temperature Maximum operating temperature EPM filter element seals EPM filter element seals (steam) Fluoraz® filter element seals Minimum operating temperature Maximum cold hydraulic test pressure Maximum differential pressure 5 bar * Other limits on request. Maximum operating conditions may be limited by the filter housing end connections due to normative restrictions. Remark: maximum recommended pressure drop of 0,07 bar. VALSTEAM ADCA...

Open the catalog to page 2

THREADED TUBE WELD PN 16 CLASS 150 ISFE SIZE THREADED TUBE WELD PN 16 CLASS 150 ISFE SIZE

Open the catalog to page 3

Filter housing body Filter housing cover Safety clamp * Filter element * Filter seal o-rings * Available spare parts. ** Others on request. FDA / USP Class VI seals certificate on request. All filters have a serial number. In case of non-standard filter, this number must be supplied if spare parts are ordered. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 4

TYPICAL INSTALLATION – FILTERED STEAM PRESSURE REDUCING STATION 12 9 ADCA S16SS Centrifugal humidity separator ADCA PRV47i Pilot operated pressure reducing valve ADCA Safety valve ADCAPure ISC20i Culinary steam filter ADCAPure SC32P Sample cooler ADCAPure SRTH10 Check valve ADCA TSS22 Steam trap ADCA M3i1 Three piece ball valve ADCA GSV Gauge siphon ADCA GC400i Gauge cock ADCA MAN100i Pressure gauge ADCAPure SMAN-63R Pressure gauge Sanitary needle valve UniADCA CTS4U Compact trapping station with UFS32 Steam trap VALSTEAM ADCA We reserve the right to change the design and material of this...

Open the catalog to page 5

ORDERING CODES – ISC20i FILTER HOUSING Filter model ISC20I ISC20i – AISI 316L / 1.4404 filter housing ISC20I ISC20i2 – CF8M / 1.4408 body and AISI 316L / 1.4404 cover ISC20I2 Housing seal material PTFE/FPM (1/4" to 3" - DN 10 to 80) or PTFE (4" and 6" - DN 100 and 150) Pipe connection Female threaded ISO 7 Rp (only available from 1/4" up to 2") Female threaded NPT ASME B1.20.1 (only available from 1/4" up to 2") Tube weld Flanged EN 1092-1 PN 16 Flanged ASME B16.5 Class 150 Size 1/4" 3/8" or DN 10 ... 3"L or DN 80L 3"H or DN 80H ... 6"L or DN 150L 6" or DN 150H Special / Extras Full...

Open the catalog to page 6

ISC20i 6Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

ISC20i
6Pages