FLT41
5Pages

Catalog excerpts

ADCA FLOAT AND THERMOSTATIC STEAM TRAPS FLT41 (Stainless steel 1/2” – 1”; DN 15 – 25) DESCRIPTION The FLT41 is a series of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential. MAIN FEATURES Modulating discharge of condensate at steam temperature. Unaffected by sudden or wide load and pressure variations. No backing-up with condensate. Excellent air discharge through its integrated air vent. Flow direction can be easily changed by repositioning the body in relation to the mechanism and cover. OPTIONS: Equalizing (vent) and drain connections. SLR – Steam lock release. HVV – Hand vent valve. BDV – Blowdown valve. AFZ – Anti-freeze device. FLL – Float lifting lever. VB21M – Vacuum breaker. Saturated and superheated steam. AVAILABLE MODELS: Female threaded ISO 7 Rp or NPT. Flanged EN 1092-1 PN 40. Flanged ASME B16.5 Class 150 or 300. Socket weld (SW) ASME 16.11. Inline horizontal or vertical installation. Angled horizontal or vertical installation. See IMI – Installation and maintenance instructions. CE MARKING – GROUP 2 (PED – European Directive) PN 40 VALSTEAM ADCA BODY LIMITING CONDITIONS FLANGED PN 40 * ALLOW. PRESS. FLANGED FLANGED CLASS 300 ** CLASS 150 ** RELAT. TEMP. ALLOW. ALLOW. PRESS. PRESS. PMO – Maximum operating pressure: 32 bar. TMO – Maximum operating temperature: 250 ºC. * Acc. to EN 1092-1:2018; ** Acc. to EN 1759-1:2004. Body limiting conditions PN 40 or below, depending on the type of connection adopted. Rating PN 40 for threaded and SW versions. We reserve the right to change the design and material of this prod

Open the catalog to page 1

ADCA FLOW RATE CAPACITY (kg/h) DIFFERENTIAL PRESSURE (bar) Angled design DIMENSIONS (mm) – INLINE DESIGN THREADED / SW DIMENSIONS (mm) – ANGLED DESIGN THREADED / SW * As standard, in versions with EN flanges or female ISO 7 Rp threads, these connections are female threaded ISO 228. In versions with ASME flanges, female NPT threads or SW, these connections are female threaded NPT. VALSTEAM ADCA

Open the catalog to page 2

HVV - Hand vent valve FLL - Float lifting lever SLR - Steam lock release VALSTEAM ADCA BDV - Blowdown valve (Manual) AFZ - Anti-freeze device (Automatic) We reserve the right to change the design and material of this product without notice.

Open the catalog to page 3

Body (inline flanged) Body (inline threaded) Body (angled) Stainless steel / Graphite * Valve ball Stainless steel; Bimetallic Steam Lock Release Lever mechanism Hand vent valve Blowdown valve Anti-freeze device Vacuum breaker * Available spare parts; ** Not applicable in NPT version. FLOW DIRECTION IR - Horizontal from right to left AR - Angled from right to front VALSTEAM ADCA IL - Horizontal from left to right IT - Vertical from top to bottom AL - Angled from left to front AT - Angled from top to front We reserve the right to change the design and material of this product without notice.

Open the catalog to page 4

ADCA ORDERING CODES FLT41 Model FLT41 – stainless steel Differential pressure 4,5 bar 32 bar Automatic air vent Bimetallic air vent (standard) 3/8” threaded connections on top and bottom, closed with plugs (mandatory if any options are considered) Options If any, these have specific separate ordering codes, please refer to the appropriate documentation. SLR - Steam lock release X With steam lock release assembled FLL - Float lifting lever None Lifting lever on the right side (when facing the steam trap body) Lifting lever on the left side (when facing the steam trap body) Flow direction...

Open the catalog to page 5

FLT41 5Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

FLT41
5Pages