FA45.1
5Pages

Catalog excerpts

ADCA AIR AND GAS FLOAT TRAPS FA45.1 (Stainless steel 1”; DN 25) DESCRIPTION The FA45.1 is a series of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains. MAIN FEATURES Modulating discharge. Unaffected by sudden or wide load and pressure variations. Flow direction can be easily changed by repositioning the body in relation to the mechanism and cover. OPTIONS: Metal to metal sealing. Equalizing (vent) and drain connections. BDV – Blowdown valve. AFZ – Anti-freeze device. FLL – Float lifting lever. Compressed air and other non corrosive gases compatible with the construction. AVAILABLE MODELS: Female threaded ISO 7 Rp or NPT. Flanged EN 1092-1 PN 40. Flanged ASME B16.5 Class 150 or 300. Socket weld (SW) ASME 16.11. Inline horizontal or vertical installation. Angled horizontal or vertical installation. See IMI – Installation and maintenance instructions. CE MARKING – GROUP 2 (PED – European Directive) CLASS 150 VALSTEAM ADCA BODY LIMITING CONDITIONS FLANGED PN 40 * ALLOW. PRESS. FLANGED FLANGED CLASS 300 ** CLASS 150 ** RELAT. TEMP. ALLOW. ALLOW. PRESS. PRESS. PMO – Maximum operating pressure: 32 bar. TMO – Maximum operating temperature: FPM / Viton valve sealing: 200 ºC. Metal to metal sealing: 250 ºC. Min. liquid specific weight: 0,75 kg/dm³. * Acc. to EN 1092-1:2018; ** Acc. to EN 1759-1:2004. Body limiting conditions PN 40 or below, depending on the type of connection adopted. Rating PN 40 for threaded and SW versions. We reserve the right to change the design and material of this product wi

Open the catalog to page 1

ADCA FLOW RATE CAPACITY (kg/h) DIFFERENTIAL PRESSURE (bar) Angled design DIMENSIONS (mm) – INLINE DESIGN THREADED / SW DIMENSIONS (mm) – ANGLED DESIGN THREADED / SW * As standard, in versions with EN flanges or female ISO 7 Rp threads, these connections are female threaded ISO 228. In versions with ASME flanges, female NPT threads or SW, these connections are female threaded NPT. VALSTEAM ADCA We reserve the right to change the design and mat

Open the catalog to page 2

FLL - Float lifting lever BDV - Blowdown valve (Manual) VALSTEAM ADCA AFZ - Anti-freeze device (Automatic) We reserve the right to change the design and material of this product without notice.

Open the catalog to page 3

Body (inline flanged) Body (inline threaded) Body (angled) Stainless steel / Graphite * Valve ball Lever mechanism Blowdown valve Anti-freeze device * Available spare parts; ** Not applicable in NPT version. FLOW DIRECTION IR - Horizontal from right to left IL - Horizontal from left to right IT - Vertical from top to bottom AR - Angled from right to front AL - Angled from left to front AT - Angled from top to front VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 4

ADCA ORDERING CODES FA45.1 Model FA45.1 – stainless steel Differential pressure 4,5 bar 32 bar Valve sealing FPM / Viton (standard) 3/8” threaded connections on top and bottom, closed with plugs (mandatory if any options are considered) Options If any, these have specific separate ordering codes, please refer to the appropriate documentation. FLL - Float lifting lever None Lifting lever on the right side (when facing the steam trap body) Lifting lever on the left side (when facing the steam trap body) Inline horizontal from right to left (standard) Inline horizontal from left to right...

Open the catalog to page 5

FA45.1 5Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

FA45.1
5Pages