ECRUV
4Pages

Catalog excerpts

ADCA ELECTRIC CONDENSATE RECOVERY UNITS ECRUV DESCRIPTION The ADCAMat ECRUV series electric condensate recovery units are recommended in the transfer of high-temperature water such as hot condensate, to a higher elevation or pressure. This condensate is usually used as boiler feedwater. The standard models are prepared for flows up to 4 m³/h. The units are composed of a vertical condensate vessel (receiver), a metallic support frame, electric pump, level controls, valves, prewired control panel and pipework for connections between the different elements of the units. OPERATION The condensate is brought into the vessel through the inlet connections, with stainless steel sparge pipes, located on the top of the vessel. As the condensate level rises it will trigger the level control system to start the pumping process. MAIN FEATURES Condensate vessel – Completely manufactured from carbon steel or AISI 316 stainless steel, with inlet connections, overflow, air vents, drain, pump feeding outlets and a set of conductive level switches. Metal frame – Manufactured from structural steel (sandblasted and painted) or stainless steel (sandblasted). Pump – Manufactured from stainless steel, capable of handling hot condensate up to 98 ºC and designed for low NPSH. Control panel – Metal enclosure rated to IP 65 or higher. Features pump fault indication, level alarms, operating mode selector switch and voltfree telemetry terminals for remote stats. The unit requires a 3 phase, 380-415 V AC, 50 Hz power supply. AVAILABLE MODELS: ECV150 2T10 – 150L vessel capacity, 2 m³/h flow rate and 10 m delivery head. ECV225 4T10 – 225L vessel capacity, 4 m³/h flow rate and 10 m delivery head. Others on request. Thermal insulated vessel. Full or partial stainless steel construction. Different pumping capacities. Alternative designs. CERTIFICATION The ADCAMAT ECRUV is designed to operate exclusively at atmospheric pressure and therefore is outside the scope of the European Pressure Equipment Directive. It complies with the European Machinery Directive and therefore carries the CE mark. When supplied with an integrated control panel the compliance with the Low Voltage Directive and the Electromagnetic Compatibility Devices Directive is also ensured. A declaration of conformity is delivered with the equipment according with the relevant Directives in use. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

* Dimensions and configuration may vary depending on the model. CONNECTIONS MODEL ECV225 4T10 2" 2" 2" * As standard female threaded connections are ISO 7 Rp. Female threaded NPT connections are available on request. ** As standard male threaded connections are ISO 7 R. Male threaded NPT connections are available on request. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 2

CARBON STEEL / CAST IRON STAINLESS STEEL Metal frame Ball valve Electric pump Check valve Conductive switches (multipoint detection) Control panel Carbon steel Stainless steel Thermal insulation ** Rockwool / Aluminium Rockwool / Aluminium * References shown are merely indicative and can be changed without notice. ** Optional. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 3

ADCA ORDERING CODES ECRUV Model ECRUV Electric Condensate Recovery Unit (vertical design) Vessel capacity 150 liters Carbon steel AISI 316 / 1.4401 stainless steel Number of electric pumps Single pump (3~ 380 – 415 V, 50 Hz) Maximum flow rate and delivery head in meters at the mentioned flow 2 m³/h at 10 metres (with 150 L vessel) 4 m³/h at 10 metres (with 225 L vessel) Fabricated carbon steel Fabricated stainless steel Carbon steel Stainless steel Control panel Without control panel Control panel with carbon steel enclosure, conductive switches and wiring Control panel with stainless steel...

Open the catalog to page 4

ECRUV 4Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

ECRUV
4Pages