ECRU
4Pages

Catalog excerpts

ADCA ELECTRIC CONDENSATE RECOVERY UNITS ECRU DESCRIPTION The ADCAMAT ECRU series electric condensate recovery units are recommended in the transfer of high-temperature water such as hot condensate, to a higher elevation or pressure. This condensate is usually used as boiler feedwater. The standard models are prepared for flows up to 30 m³/h, or higher on request. The units are composed of an horizontal condensate vessel (receiver), a metallic support frame, electric pumps, level controls, valves, prewired control panel and pipework for connections between the different elements of the units. OPERATION The condensate is brought into the vessel through the inlet connections, with stainless steel sparge pipes, located on the top of the vessel. As the condensate level rises it will trigger the level control system to start the pumping process. In normal operating conditions, the pumps will work in alternating mode, which means they will alternate duty at the end of each cycle. In the event of a peak load, the level will continue rising eventually triggering the cascading switch which will make both pumps work simultaneously to relieve this peak demand. MAIN FEATURES Condensate vessel – Completely manufactured from AISI 316 stainless steel or carbon steel, with inlet connections, overflow, air vents, drain, pump feeding outlets and a magnetic level indicator with bi-stable switches. Pipework, valves and ancillaries – Includes full bore ball valves at the pump suction ports, manual regulating valves for system head regulation at the pumps discharge, pipework, strainers and pressure gauges. Metal frame – Manufactured from structural steel (sandblasted and painted) or stainless steel (sandblasted). Pumps – Manufactured from cast iron or stainless steel, capable of handling hot condensate up to 98 ºC and designed for low NPSH. Control panel – Metal enclosure rated to IP 65 or higher. Features alternating and cascading (simultaneity) functions, pump fault indication for each pump, low and high-level alarms, pump dry run inhibitor, operating mode selector switch and volt-free telemetry terminals for remote stats. The unit requires a 3 phase, 380 to 415 V AC, 50 Hz power supply. OPTIONS: AVAILABLE MODELS: Thermal insulated vessel. Full or partial stainless steel construction. Alternative designs, including ATEX compliant versions. EC225 2T10 – 225L vessel capacity, 2 m³/h flow rate and 10 m delivery head. EC225 4T10 – 225L vessel capacity, 4 m³/h flow rate and 10 m delivery head. EC600 10T10 – 600L vessel capacity, 10 m³/h flow rate and 10 m delivery head. EC600 10T20 – 600L vessel capacity, 10 m³/h flow rate and 20 m delivery head. EC600 10T30 – 600L vessel capacity, 10 m³/h flow rate and 30 m delivery head. EC600 20T10 – 600L vessel capacity, 20 m³/h flow rate and 10 m delivery head. EC850 30T10 – 850L vessel capacity, 30 m³/h flow rate and 10 m delivery head. EC850 30T20 – 850L vessel capacity, 30 m³/h flow rate and 20 m delivery head. Others on request. CERTIFICATION The ADCAMAT ECRU is designed to operate exclusively at atmospheric pressure and therefore is outside the scope of the European Pressure Equipment Directive. It complies with the European Machinery Directive and therefore carries the CE mark. When supplied with an integrated control panel the compliance with the Low Voltage Directive and the Electromagnetic Compatibility Devices Directive is also ensured. A declaration of conformity is delivered with the equipment according with the relevant Directives in use. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

* Dimensions and configuration may vary depending on the model. Dimensions shown refer to units with non-stainless electric pumps. CONNECTIONS * MODEL * As standard flanged connections are EN 1092-1 PN 16 and female threaded connections are ISO 7 Rp. Flanged connections according to ASME B16.5 Class 150 and female threaded connections according to ASME B1.20.1 (NPT) are available on request. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 2

CARBON STEEL / CAST IRON STAINLESS STEEL Metal frame Ball valves Electric pumps Check valves Pressure gauge Gauge cock Globe valve Magnetic level indicator Level switch Control panel Carbon steel Stainless steel Thermal insulation ** Rock-wool / Aluminium Rock-wool / Aluminium * References shown are merely indicative and can be changed without notice. ** Optional. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 3

ADCA ORDERING CODES ECRU Model ECRU Electric Condensate Recovery Unit Vessel capacity 225 liters 850 liters Vessel material Carbon steel AISI 316 / 1.4401 stainless steel Number of electric pumps Single pump (non standard) (3~ 380 to 415 V, 50 Hz) Single pump in stainless steel (non standard) (3~ 380 to 415 V, 50 Hz) Two pumps in stainless steel (3~ 380 to 415 V, 50 Hz) Maximum flow rate and delivery head in meters at the mentioned flow 2T10 2 m³/h at 10 metres (with 225 L vessel) 4 m³/h at 10 metres (with 225 L vessel) 10 m³/h at 10 metres (with 600 L vessel) 10 m³/h at 20 metres (with 600...

Open the catalog to page 4

ECRU 4Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

ECRU
4Pages