BM20R
2Pages

Catalog excerpts

ADCA BIMETALLIC STEAM TRAPS AND AIR VENTS BM20R DESCRIPTION The BM20R series bimetallic steam traps and air vents are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption. MAIN FEATURES Modulating discharge. Discharges condensate below steam temperature. Easy condensate temperature adjustment without disconnecting the trap from the piping. Independent valve and seat placed in the low velocity flow area reduces erosion and extends product life. Low maintenance costs consequence of the split regulator design. Excellent air discharge. Freeze protection of condensate lines. Operates on superheated steam. Unaffected by water hammer and vibrations. Built-in strainer. OPTIONS: Blowdown valve. Seat with check valve. Saturated and superheated steam. AVAILABLE MODELS: SIZES: Female threaded ISO 7 Rp or NPT. Flanged EN 1092-1 PN 40. Flanged ASME B16.5 Class 150 or 300. Socket weld (SW) ASME 16.11. Butt weld (BW) ASME B16.25 on request. BODY LIMITING CONDITIONS BM20R – carbon steel, with external adjustable temperature control. FLANGED PN 40 / CLASS 300 * ALLOWABLE PRESSURE FLANGED CLASS 150 ** ALLOWABLE PRESSURE RELATED TEMP. PMO – Max. operating pressure: 17 bar. TMO – Max. operating temperature: 250 ºC. * Acc. to EN 1092-1:2018. ** Acc. to EN 1759-1:2004. Body limiting conditions PN 40 or below, depending on the type of connection adopted. Rating PN 40 for threaded, SW and BW versions. Horizontal installation recommended, can be installed in any position. See IMI – Installation and maintenance instructions. FLOW RATE CAPACITY (kg/h) VALSTEAM ADCA We reserve the right to change the design and material of this product without notice. Produced in accordance with Sound Engineering Practices of the European PED - Pressure Equipment

Open the catalog to page 1

Stainless steel / Graphite Hardened stainless steel Hardened stainless steel * Seat gasket Adjusting screw Seal ring * Strainer screen Strainer cover Stainless steel / Graphite * Blowdown valve Ball check valve * Available spare parts. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice. Produced in accordance with Sound Engineering Practices of the European PED - Pressure Equipment Directive.

Open the catalog to page 2

BM20R 2Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

BM20R
2Pages