BM20
2Pages

Catalog excerpts

ADCA BIMETALLIC STEAM TRAPS AND AIR VENTS BM20 DESCRIPTION The BM20 series bimetallic steam traps and air vents are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption. MAIN FEATURES Modulating discharge. Discharges condensate below steam temperature. Excellent air discharge. Operates on superheated steam. Unaffected by water hammer and vibrations. Built-in strainer. OPTIONS: Blowdown valve. Saturated and superheated steam. AVAILABLE MODELS: Female threaded ISO 7 Rp or NPT. Flanged EN 1092-1 PN 40. Flanged ASME B16.5 Class 150 or 300. Socket weld (SW) ASME 16.11. Butt weld (BW) ASME B16.25 on request. Horizontal installation recommended, can be installed in any position. See IMI – Installation and maintenance instructions. CE MARKING – GROUP 2 (PED – European Directive) PN 40 BODY LIMITING CONDITIONS FLANGED PN 40 / CLASS 300 * ALLOWABLE PRESSURE FLANGED CLASS 150 ** ALLOWABLE PRESSURE RELATED TEMP. PMO – Max. operating pressure: 17 bar. TMO – Max. operating temperature: 250 ºC. * Acc. to EN 1092-1:2018. ** Acc. to EN 1759-1:2004. Body limiting conditions PN 40 or below, depending on the type of connection adopted. Rating PN 40 for threaded, SW and BW versions. FLOW RATE CAPACITY (kg/h) VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

* Strainer screen * Strainer gasket Stainless steel / Graphite Stainless steel / Graphite * Strainer cover * Bimetallic regulator Corrosion resistant bimetal; Stainless steel * Seat gasket * Available spare parts. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice. IS 1.410 E

Open the catalog to page 2

BM20 2Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

BM20
2Pages