AE30SS
1Pages

Catalog excerpts

ADCA AUTOMATIC AIR AND GAS VENTS FOR LIQUID SYSTEMS AE30SS DESCRIPTION The AE30SS all stainless steel sealed body air eliminator removes air from hot and superheated water systems and is also suitable for all liquids compatible with the construction, providing that their specific weight is not less than 0,75 kg/dm³. This ball float type automatic air eliminator can be used in combination with other air elimination and separation systems or directly applied at high points in the piping. MAIN FEATURES Corrosion resistant. USE: Cold, hot and superheated water systems. AVAILABLE MODELS: SIZES: Female threaded ISO 7 Rp or NPT. 1/2" or 3/4" vertical Inlet. 1/2" vertical outlet. Vertical installation. It must be installed absolutely vertically at the points in the plant where the air tends to collect. The drain should be piped to a safe position. See IMI – Installation and maintenance instructions. DIMENSIONS (mm) APPLICATION LIMITS Min. liquid specific weight Maximum working diff. pressure BODY LIMITING CONDITIONS THREADED PN 40 ALLOW. PRESS. RELATED TEMPERATURE PMO – Max. operating pressure: 30 bar. TMO – Max. operating temperature: 300 ºC. FLOW RATE CAPACITY (NL/min) MODEL Values shown refer to capacities of air discharge at 15 ºC, under average atmospheric pressure (1013 mbar). If the temperature of the air differs from 15 ºC, the discharge capacity can be corrected by multiplying it by: temperature in ºC. It may be assumed that the temperature of the air is equal to the temperature of the water. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice. Produced in accordance with Sound Engineering Practices of the European PED - Pressure Equipment Directive.

Open the catalog to page 1

AE30SS 1Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

AE30SS
1Pages