Catalogs >
VAL.CO srl >
SIMPLE S50

SIMPLE S50
2Pages

Catalog excerpts

Level switch GENERAL CHARACTERISTICS These level switches, with their reduced dimensions and simplicity of installation, constitute a reliable solution for the control of liquids in all applications where it is necessary to mount a lateral type. Suitable for use with process temperature up to 180 ° C. • 1 or 2 microswitches. • Supporting adjustable float-rod • Executions in Brass and AISI-316 • Maximum working pressure 25 bar • Operating ambient temperature -30 /+55 °C - 90% RH • Maximum working temperature 180 °C • Degree of protection IP65 TECHNICAL DATA Process connection Ø DN 1” 25 Male thread ELECTRICAL CONTACTS TYPE L1 = N.1 Body materials O Brass Independent Separately wired microswitches SPDT Changeover contacts ELECTRICAL OUTPUT W IP65 Housing PA6 + glass fiber 6 terminals Polyamide cable gland PG9 We reserve the right to change the data without notice

Open the catalog to page 1

Level switch SWITCH POINTS TYPE C ROD Switch points of the microswitches reported to the mechanical axis of the instrument with liquid having S.G. = 1 Rod length Long Medium Short General tolerances on the switch points ±5 mm. All measurements are in mm. SWITCH POINTS TYPE D ROD Switch points of the microswitches reported to the mechanical axis of the instrument with liquid having S.G. = 1 Rod length Long Medium Short General tolerances on the switch points ±5 mm. All measurements are in mm. ASSEMBLY AND INSTALLATION Float assembly • Remove the blocking pin from the rod of the float. •...

Open the catalog to page 2