Catalogs >
VAL.CO srl >
SENSOBAR PSV-F4

SENSOBAR PSV-F4
2Pages

Catalog excerpts

Pressure switch GENERAL CHARACTERISTICS ££ The pressure switches PSV4 series use, as sensitive element, a diaphragm or a piston depending on the measuring range. An electrical contact, SPDT type, is activated when the set value is reached. The adjusting screw is mounted on the head of the instruments, you can set the calibration value, within the entire measuring range. Appropriate mechanical stops protect the electrical contact from excess of pressure. The electrical connections is realized via a DIN-43650 plug with IP65 degree of protection. These pressure switches are used in hydraulic and pneumatic equipment, in the industrial plants, pumps, machine tools etc.. • Pressure control from 0.2 to 400 bar. • SPDT contact. • Easy to use and adjust. SETTING RANGES Tolerance Hysteresis value fixed bar bar Ottone Acciaio Inox (•) Reference to NBR diaphragm, stainless steel piston / NBR seals TECHNICAL DATA Description Tropicalized steel Brass Stainless steel AISI-316 Code (-) L X Process connection Contact Electrical output Mechanical life 106 cicli S 90 Switching frequency cycle/min S We reserve the right to change the data without notice Flow Temperature www.valoo.it

Open the catalog to page 1

adjustment To adjust the set point, turn the screw located into the head of the pressure switch. • Clockwise = Increase (+) • Counterclockwise = decrease (-) Pressure switch We reserve the right to change the data without notice Type Contact and Wiring Adjustable range or Setting value - Sensing element Electrical output Body material Diaphragm / piston material Process connection Degree of protection Flow °/Bssun Temperature-Electronic www.valco.it

Open the catalog to page 2