GENERAL CHARACTERISTICS The capacitive probes, SCV series, are a good solution to control the level of liquids such as water, oil, gas and solids such as powders and granular materials. The probes are available in different lengths and their construction has been suitably designed to ensure high operational reliability in difficult conditions, such as those found on industrial plants. • No moving parts. • PTFE coated electrode. • Hermetic construction, polyurethane resin. • Minimum degree of protection IP65. TECHNICAL DATA Description Power supply Current consumption Electrical output NPN Max. load 3W Activation delay Differential Electrode Electrode coating Switch point L1 Length L0 mm. Electrical connection Max. pressure (bar) Media temperature range Use - type of liquid from 1 to 10 sec. T on request from 0 to 5 mm. on request Cu-Zn alloy PTFE Vertical Horizontal: DIMENSIONS AND MATERIALS F SW B Male thread N G C Available materials O S MAINTENANCE Only warning to observe is a periodic review of the state of the electrode and its coating and, if necessary clean it with noncorrosive liquids. Capacitive level-sensor. Use - type of liquid. Process connection dimension. Process connection thread and material. Electrode coating and length (mm). Electrical output and length. Delay and/or differential on request (to be indicated in p. order) Electrical connection. We reserve the right to change the data without notice flow Pressun Temperature-Electronic www.valco.lt