Safety barrier SAFE SW APPROVED IN ACCORDANCE WITH THE EUROPEAN STANDARD 94/9/EC - ATEX €>C€ The intrinsic safety barriers for level sensors MULTIPOINT I (On- Exia Off) allow to repeat, in a safe area, a NO or NC contact installed in an hazardous area. Certificate N. TUV 07 ATEX 553234 II 1GD Exia IIC T6. They are available both in single channel or dual channel with full galvanic insulation between the two areas under control. GENERAL CHARACTERISTICS • One or two measuring channel. • LED operating indicator. • Relay output. • 35 mm DIN bar mounting. Name Tab.1 Active barrier Tab.1 N. of input channels Tab.1 Output contact selectable NO or NC for each channel Tab.1 Power supply We reserve the right to change the data without notice Butoric www.valco.it