GENERAL CHARACTERISTICS Standard unit designed for the OEM market that, for material and size, it offers to the user a simple and economical solution to control the liquid level. The unit is supplied with 500 mm leads length; other lengths are available on request. The contact is supported by a printed circuit board as a guarantee of its positioning and is sealed inside the rod with epoxy resin and polymerization is performed in a controlled temperature oven. The principle of operation is based on the actuation of a reed contact by a magnetic float. The only moving element is the float that moves due to the hydrostatic thrust. A sturdy product and maintenance-free. • Construction entirely in natural polypropylene • Working pressure up to 4 bar • Operating temperature up to 90 ° C • Minimum degree of protection IP65 Level switch Code Float L1 = Switch point with liquids of specific gravity = 1 ELECTRICAL CONTACT VOLTAQGE CURRENT We reserve the right to change the data without notice Flow pressm Temperature-Electtrie www.valco. it