SmartMelt Series The New Generation of adhesive melters: 15, 30, 65 & 120L Valco Melton's SmartMeltTM Series has been specifically designed for easy plug-n-play upgrades of additional heating zones, flow control, pumping stations, and more. This fully customizable unit permits an accurate control of the glue applied during machine ramp up and down. Key highlights of the SmartMelt Series include: • Connect anywhere with optional wifi remote connectivity and online technical assistance • Analog and digital signals on Harting connector interface 100% compatible • Expand the unit's control capabilities with the addition of compact Smart boxes. Each box is controlled from the same melter. No re-engineering required • Main machine network communication protocols (Profinet and Ethernet) are 100% compatible The pump control can be programmed in grams per product or grams per square meter, depending on each application's specific requirements. All electronics are "Off the Shelve" commercially available components: PLC with 5.7” Color Touch Screen, IO boards, drives, AB solid state relays etc. non propietary electronics Reduce space on the floor with its compact design as the motors are vertically stacked in pairs Two main heated grids on bottom on the tank to prevent adhesive degradation ©2017 Valco Cincinnati, Inc. All Rights Reserved. Valco Cincinnati reserves the right to make changes between printing.

Smart Flow Smart Heat Smart Heat Smart Architecture - Flexibility for future expansions Valco Melton's Smart Series offers the possibility for easy future upgrades through a connecting communication cable. Each tank is capable to expand its control capability adding compact Smart Boxes: • Up to 2 Smart Drive compact boxes with 2 frequency drives and 4 inputs for pressure reading to add extra pump control and process diagnostics • Up to 2 Smart Heat compact boxes for extra Smart Drive temperature channels with 4 hose/ head connectors • Up to 2 Smart Flow compact boxes, each with up to 4 flow meters...