1. Catalogs
  2. Valco Melton
  3. 3NCR Tri-Valve

3NCR Tri-Valve

3NCR Tri-Valve

3NCR Tri-Valve

Product catalog summary
Overview
The document provides technical details about the 3NCR Tri-Valve, a non-contact glue station designed for top-down and bottom-up applications in flexo folder gluers. It highlights the innovative features and specifications of the product, emphasizing its versatility and efficiency.

Key Features
  • Quick release pull rings for tool-less, fast switching between inside and outside glue applications.
  • A silicone nozzle sealing pad to prevent adhesive drying during machine downtime.
  • Patented design allowing installation on one side of the machine, eliminating the need for dual-side equipment.
  • Non-contact application to avoid board marking, skewing, and applicator headwear.
  • Capable of handling up to 28,000 boxes per hour.
  • Automatic tip sealer retraction during operation.

Specifications
  • Dimensions: 330mm tall x 300mm long x 180mm wide.
  • Max. Fluid Pressure: 35 bar (500 psi).
  • Max. Speed: Over 400 sheets per minute.
  • Fluid Viscosity: 400-800 mPa.s (cps).
  • Number of Valves: 3 or 4 (Model 524).
  • Stainless steel high-speed electric dispensing valves with ceramic tipped plungers and seats.

Additional Information
The 3NCR Tri-Valve is part of Valco Melton's Flexoseal® Glue Station Series, suitable for both contact and non-contact applications. For further details, contact Valco Melton's headquarters or visit their website.
See more

Catalog excerpts

3NCR Tri-Valve-1

3NCR Tri-Valve Non-Contact Glue Station for Top-Down and Bottom-Up Applications Upgrade your flexo folder gluer with bottom-up and top-down non-contact glue application capabilities using one single gluing station. Previously, non-contact glue stations featured a fixed configuration, which required one glue station on each side of the machine for full functionality. The patented 3NCR Tri-Valve Glue Station has been engineered for maximum versatility. Installed on one side of the machine, the operator can quickly set it to run for either inside or outside glued boxes with only the pull of a ring. • Eliminate the need to invest in gluing equipment for both sides of the machine with the 3NCR's ability to apply to either the top, or bottom of the sheet. • Avoid potential risks of board marking, board skewing and applicator headwear associated with contact gluing technologies. • Achieve outstanding performance on machines operating up to 28,000 boxes per hour. • Install on the operator or drive side. Perfect for machines that can mount a glue station on only one side. Quick release pull rings allow for a tool-less, ultra-fast switch from inside to outside glue. A silicone nozzle sealing pad prevents adhesive from drying in the nozzles during machine downtime. The tip sealer is automatically moved away when the system is in operation. © Valco Cincinnati, Inc. All Rights Reserved. Valco Cincinnati reserves the right to make changes between printing.

 Open the catalog to page 1
3NCR Tri-Valve-2

The 3NCR Tri-Valve is part of Valeo Melton's Flexoseal® Glue Station Series, which features extrusion configurations for both contact and non-contact applications. Removable product guides for easy access to valves and tip sealer. Stainless steel high speed electric dispensing valves with impact and corrosion resistant engineered ceramic tipped plungers and seats. Valves are always in use; this reduces the risk of adhesive degradation caused by idle equipment. For more information, visit valcomelton.com or contact your local Valco Melton representative. World Headquarters: USA, Cincinnati, Ohio...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.