VAG ZETA®control Knife Gate Valve with pneumatic actuator (FESTO COPAC DFPI) PN 10 - DN 100...600 KAT-A 2410-CPA Product characteristics and benefits • Face-to-face length acc. to EN 558, basic series 20 (DIN 3202 / K1) • With flange end acc. to EN 1092-2, PN 10 • Full-flange design, both as wafer type and for pipeline end installation, without additional counter flange at full differential pressure • Any installation position possible • Leakproof from both flow directions • Horizontal sealing adjustable during operation and replaceable with the valve installed in the pipeline • Scraper installed on both sides of the plate to clean the knife • With integrated VAG waste water control insert • With mechanical position indicator of the knife • With pneumatic actuator FESTO COPAC DFPI Materials • • • • • Body parts, bearing plate and gland: Cast iron EN-GJL-250 (GG-25) U-sealing and horizontal sealing: Elastomer (NBR) Yoke - sheet metal construction: Stainless steel A2 Control insert: Stainless steel A4 All connecting parts: stainless steel A2 (DIN EN ISO 3506) Tests and approvals • Final inspection test according to EN 12266-1 (leakage rate A) Note Corrosion protection • For information about thread depths and bolt/screw lengths, please refer to the relevant Installation and Operating Instructions. • Warning: use only for the maximum differential pressure of 1.5 bar ! • Cast iron parts: Epoxy coated Versions • Standard version as described • Bigger sizes available on request Field of application For proper installation and safe operation please follow the installation and operation instructions: KAT-B 2410-Pneu • Chamber installation • Installation in plants • Wastewater systems Maximum operating pressure Pressure test acc. to EN 12266 Test pressure body with water Test pressure seat with water Maximum operating temperature for neutral liquids [°C] Tightness only ensured up to maximum admissible operating pressure We reserve the right to make technical changes and use similar or higher-quality materials. Drawings are non-binding. • www.vag-group.com Edition KAT-A_2410-CPA_ZETAcontrol-PA_Editio

VAG ZETA®control Knife Gate Valve with pneumatic actuator (FESTO COPAC DFPI) 2 · Penstocks/Knife Gate Valves We reserve the right to make technical changes and use similar or higher-quality materials. Drawings are non-binding. • www.vag-group.com Edition KAT-A_2410-CPA_ZETAcontrol-PA_Edition7_23-03-2021_E

VAG ZETA®control Knife Gate Valve with pneumatic actuator (FESTO COPAC DFPI) We reserve the right to make technical changes and use similar or higher-quality materials. Drawings are non-binding. • www.vag-group.com Edition KAT-A_2410-CPA_ZETAcontrol-PA_Edition7_23-03-2021_EN Penstocks/Knife Gate Valves ·