VACUU·PURE® 10C / Screw pump for aggressive gases and vapors
8Pages

{{requestButtons}}

Catalog excerpts

VACUU·PURE® 10C / Screw pump for aggressive gases and vapors - 1

100% oil-free vacuum pump for the vacuum range down to 10 -3 mbar. Outstanding performance with aggressive gases and vapors. Ideal for clean processes and pure products. Pure vacuum. Nothing else.

Open the catalog to page 1
VACUU·PURE® 10C / Screw pump for aggressive gases and vapors - 2

Pure vacuum. Nothing else. For aggressive gases and vapors ■ 10-3 mbar vacuum range Chemically resistant VACUU·PURE reliably delivers the benefits of oil-free vacuum VACUU·PURE covers many applications. The vacuum pump technology in the pressure range of 10-3 mbar. is especially developed for processes down to 10-3 mbar, The new vacuum pump combines three important benefits however, unlike other fine vacuum pump technologies it can be used across the entire pressure range from atmospheric 100% oil-free, chemically resistant, and no wear parts. pressure to its ultimate vacuum. With a pumping...

Open the catalog to page 2
VACUU·PURE® 10C / Screw pump for aggressive gases and vapors - 3

10-3 mbar vacuum range 100% oil-free For dry and complete oil-free operation, VACUU·PURE takes the screw pump principle to the next level. The vacuum pump is 100% oil-free. This enables clean processes and pure products and protects the laboratory and environment. Save both time and operating costs, since there is no need to dispose of waste oil or to interrupt your work for oil changes. Chemically resistant The wetted materials in the vacuum pump are all made of chemically resistant polymers. A thick-walled PEEK encapsulation protects the spindles and stator inside the pumping „We can let...

Open the catalog to page 3
VACUU·PURE® 10C / Screw pump for aggressive gases and vapors - 4

VACUU·PURE takes dry screw pump technology to the next The spindles and stator are protected by a thick-walled PEEK level as a solution for the use in laboratory scale. encapsulation to protect against corrosion by most chemi- The special design with two cantilevered spindles and a cals. An integrated sealing gas supply protects the bearings magnetic gear allows fully oil-free operation. from chemical attack. The unique design of VACUU·PURE gives it an exceptionally high condensate compatibility, making a gas ballast unnecessary even at high vapor loads. The spindles run contact-free and...

Open the catalog to page 4
VACUU·PURE® 10C / Screw pump for aggressive gases and vapors - 5

Heat treatment Freeze drying Fore vacuum generation for turbomolecular pumps Schlenk line Analytical applications VACUU·PURE is ideal for clean processes and pure products VACUU·PURE easily handles high vapor loads through its in the vacuum range down to 10 mbar. high condensate compatibility. A gas ballast is therefore not necessary. The integrated regeneration mode enables rapid Drying processes, manipulation of oxygen- or moisture- drying of the pump after the end of the process and thus sensitive compounds, distillations, and even coating proces- the sample throughput can be...

Open the catalog to page 5
VACUU·PURE® 10C / Screw pump for aggressive gases and vapors - 6

Technical Data Technical data Max. pumping speed Ultimate vacuum (abs.) Max. inlet pressure (abs.) Max. outlet pressure (abs.) Ambient temperature range (storage) Inlet connection Nominal mains voltage / mains frequency 100-230 V, 50/60 Hz Outlet connection 15 mbar above atmospheric pressure atmospheric pressure 5 × 10-3 mbar (at 1013 mbar ambient pressure) Ambient temperature range (operation) Rated motor power Protection class Dimensions (L x W x H), approx. Items supplied Pump completely mounted, ready for use, connection with small flange KF DN 25 (2x centering and clamping rings...

Open the catalog to page 6
VACUU·PURE® 10C / Screw pump for aggressive gases and vapors - 7

Accessories general VACUU·PURE shuttle, mobile underframe for VACUU·PURE Inlet separator AK with round bottom flask 500 ml, with KF DN 25, for VACUU·PURE Exhaust vapor condenser EK 600 with round bottom flask 500 ml, with KF DN 25, for VACUU·PURE PTFE tubing antistatic, KF DN 25/1000 mm Exhaust hose PVC, 26/19 mm (length in m) Small flange with hose nozzle, DN 25/SW15, PP Centering ring KF DN 20/25C, chemically resistant Clamping ring, aluminum, KF DN 20/25 Accessories measurement and control Vacuum gauge VACUU·VIEW extended, 1100 – 0.001 mbar VACUU·SELECT package (stainless steel) for fine...

Open the catalog to page 7
VACUU·PURE® 10C / Screw pump for aggressive gases and vapors - 8

© 2022 VACUUBRAND GMBH + CO KG · Printed in Germany · 06/2022 VACUUBRAND is part of the Brand group, a manufacturer of high-quality and innovative laboratory equipment and vacuum technology with a global team of approx. 1,000 employees. With 280 highly motivated and qualified employees, we manufacture the world's most comprehensive product family for vacuum generation, measurement and control for the rough and fine vacuum range in the laboratory. All with one goal: Enabling our customers to run reliable, safe and efficient processes. This is why we commit ourselves to continuous innovation,...

Open the catalog to page 8

All VACUUBRAND catalogs and technical brochures

  1. BVC

    8 Pages

  2. DVR 2pro

    2 Pages