DH/AC 5000 HP • SKID MOUNTED Three to four sided fork truck tubes large enough for an 8 ton fork truck. • STACKABLE Four point shipyard lifting cage with connections at 65" requiring no steps to connect rigging. Certified lifting eyes with certification printed on unit. • POWER SOURCE 460 Volt, 3Phase, 15 horsepower direct drive, high output motor with digitized motor savers to protect from power surges. DH Amp - 125 Max. (normal operation DH & AC 65 amps) AC Amps - 35 • QUIET OPERATION Below 83 decibels at 3 meters. 3-in-1 cooling, DH and blower unit • FAN 5,000 CFM @ 16" W.C. 15 ton A/S. 45KW heat with optional 60 extra KW STANDARD EQUIPMENT • Powder coated galvanized steel with Nyalic corrosion resistant coating • Electronic variable CFM • 6 Level cariable temperature and humidity settings with a flip of a switch • Camlock electrical connections with S.S. ground stud • 12" duct connection • Continuous duty cycle • 150 Amp circuit breaker • Low temperature sensor • One year warranty Dimensional Drawing On Reverse Side Industrial Vacuum Equipment Corporation N7959 Birch Road • Ixonia WI, 53036 800-331-4832 • 920-261-1136 • FAX 920-261-7117 www.industrialvacuum.