Vacmobile HRTS series 8 m3/h pump 2.5 litre resin trap Standard paper cup catchpot Vacmobile HRTS –small-trap series, using standard paper food cups for catchpots The Vacmobile HRTS series is the first in a new generation of Vacmobile designed for the hobby user that demands high quality equipment at limited cost. The Teflon coated compact trap uses a standard paper food cup as the replaceable resin catchpot. The paper cups supplied with the machine have a resin catching capacity of 950 ml. The primary uses of the HRTS series are the manufacture of moderate-sized laminates using resin infusion, vacuum bagging over wet laminate or pre-preg methods. The maximum laminate size that can be infused by an HRTS series machine very much depends on the experience of the laminator, especially familiarity with the use of wide peel ply resin breaks around the perimeter of the laminate. (For further information on wide peel ply resin breaks, please see our website note “Peel ply resin breaks” (http://www.vacmobiles.com/peel_ply_resin_breaks.html). HRTS system 950 ml (32 fluid oz) paper cup catch

Vacmobile HRTS series Specifications Vacuum pump Single phase powered continuous duty oil sealed vacuum pump Vac mobiles VSV-8. 50 Hz capacity 8 m³/h (4.7 cfm) 2880 rpm. Vac mobiles VSV-8. 60 Hz capacity 9.6 m³/h (5.6 cfm) 3440 rpm. Vacuum level Adjustable from ~55% vacuum (~450 mbar absolute) to the pump’s maximum vacuum: 10 mbar, 1000 Pa, 7.5 Torr, 99% vacuum*, 29.6“ Hg*, -99 kPa*, -14.55 psig* *Please note that the standard “analogue gauge” vacuums are weather and altitude dependent* Resin catchpot Disposable paper cup of 950 ml (32 fluid ounces) capacity. 10 spare cups are supplied with the...