69 William Street Belleville, NJ 07109 Tel: 973-759-4600 Fax: 973-759-6449 E-mail: [email protected] www.vac-u-max.com VAC-U-MAX Model 55-SR Submerged Recovery Vacuum • Submerged Recovery system with dispersion screen and splash baffle renders explosive powders inert by drawing debris under liquid with and extended inlet assembly; and safely separates debris from the air stream. Fabricated cart-type dolly (304 stainless steel) with grounding reel and 6” static conductive casters for easy mobility. 2” sanitary stainless steel drain valve and 90-degree discharge elbow, and sight glass. Cover Assembly includes hold down clamps, stainless steel anti-sparking inlet with Tri-clover (Sanitary) connection. Includes 1.5 or 2.0” ” hose depending on the model. Static conductive PTFE (teflon coated) Internal filter. Anti-sparking 304 stainless steel construction. All welds are continuously welded and ground smooth to eliminate crevices that may collect or trap vacuumed material. TECHNICAL DATA Power Unit Suction Connection Single Venturi Twin Venturi Important Notes: • It is the responsibility of the customer to ensure that the proper liquid is used to render the collected material inert. VAC-U-MAX is not responsible for incompatibility of liquids and collected materials, which may result in chemical reactions producing a gas, odor, explosion, or other hazardous conditions. • It is the responsibility of the customer to insure proper grounding of the vacuum system to prevent uncontrolled static discharge. • It is the responsibility of the customer to ensure proper handling and disposal of collected product. • It is the responsibility of the customer to provide proper training with handling explosive and/or hazardous material. • It is the responsibility of th