Technical data sheet va-Q-plus (Appliances & Food) Product Description va-Q-plus, the second generation of vacuum insulation panels, is a microporous insulation material based on fumed silica. The high-tech panel is produced at most recent and in-house developed production lines. The powdered core material and the specifically engineered foil technology ensure the outstanding insulation ability for the entire service life of the product. The typical fields of application are refrigerators and freezers with high lifetime. The maximum energy consumption prescribed by the energy labelling of the manufacturers is supported by the usage of the va-Q-plus for the entire operating life of the products. Best insulation value over the entire lifetime for insulation panels based on fumed silica Very good cost-performance ratio Extremely high flexibility and ductility Long lifetime because of optimized panel designs 100 % quality control with the patented gas pressure measurement system (va-Q-check) Sustainable product (recyclable core material) Non-flammable core material after DIN EN 13501-1 A1 Optimized adhesion during lathering with polyurethane

Properties Thermal conductivity λ(10 °C)* Thermal conductivity, ventilated λ(10 °C)* < 0.0035 W/(m∙K) (at delivery) following DIN EN 12667 < 0.020 W/(m∙K) following DIN EN 12667 Thermal transmittances (thickness = 20 mm*,10 °C) Area density Temperature resistance Moisture resistance Storage stability Optimal storable @ 23 °C, 50 % rel. humidity Thermal shock resistance Specific heat capacity -75 – 80 °C following DIN EN 60068-2-14 0 – 110 °C nach DIN EN 60068-2-14 0.8 kJ/kgK (at room temperature) Compressive strength at 10 % compression Depending on usage, up to 60 years *Please note terms of...

Measures and tolerances width w in [mm] thickness t in [mm] Remark: Based on the unique production method, the panels are less thick at the edges and corners than in the center. The measures, tolerances and insulation values refer to the insulated area of the panel form one corner to another. Circulating the panel there is a 10 mm to 20 mm wide sealing seam. A typical panel measures 8 mm up to 30 mm. The smaller the panel the slighter is the maximal thickness of the panel due to production limits. Please ask for your wished dimensions. Flaps Width of flaps Remark: The laying and fixing of the...

Legal Notes/Disclaimer The data presented in this technical data sheet are in accordance with the present state of our knowledge. All numbers and features proposed in this data sheet (e.g. lifetime) were determined under test conditions in the laboratory and therefore represent a nonbinding and purely scientific value. There are no guarantees associated with. Only the respectively agreed warranty period and warranty rights apply. To the extent permitted by law, all other warranties of any kind, whether express or implied, including, but not limited to the implied warranties of MERCHANTABILITY,...