- Catalogs
- V3Novus Pvt Ltd
- Satellite Beacon Receiver -1U
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
Satellite Beacon Receiver -1U
Satellite Beacon Receiver -1U
- J1: Power Input Connector (230VAC)
- J2: Ethernet Connector (ETH)
- J3: RS232 Connector (DB9-1)
- J4: RS422 Connector (DB9-2)
- J5: RF-IN Connector
- J6: Analog Output Connector (0-10 VDC)
- Display: 1.5” Color OLED, 128 x 128 pixels
- Red LED: Power Indicator
- Green LED: Activity Indicator
- Power Switch: ON/OFF
- 7 Buttons for Configuration and Communication
- Input Frequency Range: 950MHz to 2200MHz
- Working Threshold: C/N0 ≤ 40dBc/Hz
- Input Level Range: -115dBm to -20dBm
- Maximum Input Power: -20dBm
- Detection Bandwidth: ±30 to ±100KHz
- Tracking Bandwidth: ±100KHz
- Search/Track Rate: 2ms
- Acquisition Time: 4ms (Typical)
- Dynamic Range: 75 dB or greater
- Amplitude Accuracy: ±1 dB
- Frequency Accuracy: ±1 kHz
- Step Size: 1 kHz
- Analog Interface: SMA Female (J6)
- Analog Signal Strength: 0 to 10 VDC, 50 mA max
- Indicator Level: 0.25 to 2.5 Volts/dB
- Digital Lock Indicator Output Polarity: Adjustable
- Power Connector: 250V AC Male with IEC Filter (J1)
- Dimensions: 225 x 482.60 x 43.65 mm
- Weight: 3 kg (Approx.)
- Operating Temperature: -40°C to 80°C
- Storage Temperature: -55°C to 85°C
- Humidity: 0 to 95%, non-condensing
Catalog excerpts
V3 Novus Satellite Orbit Tracker (Sat Orb Track) - Sat Orb Track is mainly used to receive L-band single tone Beacon, accurately estimate its power and is translated to digital (RS232, Ethernet, RS422) and analog voltage. The superior acquisition 0me and amplitude stability enable it to simultaneously meet the satellite-seeking applications of portable station, static and dynamic antenna systems. The product has the characteristics of high sensitivity, wide dynamic range and short acquisition time. ❖ Display Type: 1.5" Color OLED Glass ❖ Resolution: 128 x 128 pixel resolution Red LED: Power LED Green LED: Adivity LED t J1: Power Input Connector (230VAC) t J2: Ethernet Connector (ETH) t J6: Analog Output Connector (0-10) VDC ❖ Power Switch: ON/OFF ❖ 7 Butions used for Configuration and
Open the catalog to page 1
REAR VIEW TOP VIEW SIDE VIEW ® BATONS HACK ^ FRONT VIEW All Dimensions are in ORDERING PART NUMBERV3N-SOT-BR-2200E-L-1U *1U - 1U FORM FACTOR
Open the catalog to page 2All V3Novus Pvt Ltd catalogs and technical brochures
Catalogs & Line Card8 Pages
GNSS Re-Radiator -1 Channel2 Pages
GNSS Re-Radiator - 4 channel2 Pages
DIKSUCHI LITE2 Pages
True North Path Finder2 Pages
Navic GNSS Receiver2 Pages
MILGRADE WIFI ROUTER2 Pages
Rugged ADS-B Receiver2 Pages
Quad Band GNSS Antenna2 Pages
Rugged GNSS Receiver2 Pages
GPS/GLONASS ANTENNA2 Pages
DIKSUCHI-42 Pages
DIKSUCHI-12 Pages
- Power supply unit
- DC power supply
- AC/DC power supply
- Touch monitor
- Ethernet switch
- HDMI monitor
- VESA mounting monitor
- LED monitor
- USB monitor
- CE power supply
- LED backlight monitor
- Managed switch
- DVI port monitor
- Generator
- TFT-LCD monitor
- PoE network switch
- Touch screen HMI
- Rugged network switch
- Wide monitor
- LCD operator terminal