SUNRAY QUAD UV Flood Curing System The SUNRAY QUAD is a large area UV flood curing lamp system. All system components are integrated into the lamp head which can be easily mounted anywhere on a factory floor, with virtually no cabling or remote power supply boxes required. Just mount the head, connect the AC line cord, and start curing! The 4 long-life 600W metal-halide arc lamps and parabolic reflectors illuminate a 16 x 12 inch curing area with evenly distributed UV light. The wide range 200-240VAC input voltage range allows the SunRay Quad to be used worldwide. The system features standby mode, elapsed hour-meter, rear panel signal interface connector and 4 variable speed cooling fans. Also available with UVA, UVB & visible lamp spectral types, and Rayven shielded curing chamber. Uvitron International  150 Front St, Unit 4  West Springfield, MA 01089 (413) 731-7835  www.uvitron.com  [email protected]

SYSTEM FEATURES + Standby Mode The unit features a standby mode rocker switch, which reduces lamp power to one third. This mode can be used either for low power curing, or to reduce heat and stray UV light output while the system is idling and not in use. + Front Panel Display & Indicators A front panel hour meter tracks lamp age, allowing for consistent lamp replacement scheduling. Lamp Fault & System Power-on LEDs provide system status information. + External Logic Signal Interface The system can be remotely monitored and controlled using logic signals available at a D-sub connector on the...