SKYRAY 800 UV LED Curing System The SkyRay 800 is a compact microprocessor controlled LED flood curing system. The SkyRay integrates all system components into a small lamp head which can be easily mounted anywhere on a factory floor, with no remote controller, power supply box or remote cooler required. Just mount the head, connect the AC power cord and start timed exposure curing! The long life solidstate LEDs illuminate a 5x5 inch curing area with cool and evenly distributed high intensity light. The system features an integrated exposure timer and adjustable output intensity. The front panel LCD display and sealed membrane type keypad make programming and monitoring of curing operations a snap. System dose and setup parameters feature password protection to prevent unauthorized changes to sensitive process and control settings. The unit features a variable speed cooling fan and convenient flush-mounted carrying handles. The enclosure’s slim design allows for side-by-side mounting of multiple units for exposure of larger curing areas. FEATURES + System Timers Duration of curing is controlled by a 1 to 9999 second timer that turns off the LEDs and beeps after exposure is complete. The timer can alternatively be switched to a 1 to 9999 hour mode for use in artificial aging or other long exposure applications. The exposure timer can also be set to a user controlled manual mode in which exposure time increments on the display to indicate elapsed time of a cure. + Lamp Intensity Control The system has a user adjustable 0 to 100% intensity level. This feature provides the flexibility of choosing appropriate curing intensity for sensitive materials. Figure 1: SkyRay 800 mounted on optional Rayven curing chamber + Status Indicators and Alarms Three front panel LEDs are provided: AC power-on / door open, lamp LEDs on, and system alarm. The SkyRay also monitors all internal sub-systems and environmental conditions, and displays system status, internal temperature levels and alarm conditions on the LCD display. Uvitron International  150 Front St, Unit 4  West Springfield, MA 01089 (413) 731-7835  www.uvitron.com  [email protected]  R

The system can be remotely monitored and controlled using isolated logic signals available at a 15-pin D-sub connector on the unit’s top panel. The digital logic functions allow high-speed control of the SkyRay for applications requiring a direct interface with machine controllers or PLCs. Control signals include LEDs on/off, 0 to 10V LEDs intensity, and a safety interlock that disables LEDs. Monitoring signals include LEDs lit, chamber temperature and system alarm. + Remote control via PC serial port The system can also be remotely controlled via USB or RS485 serial ports. A Windows™ compatible...

5kyRay Configurations Mounting and conveyor options for SkyRay 800 SkyRay + Curing area: 5" x 5" + Up to 2200 mW/cm2 Intensity @ 1" + Cool-output Long-life LEDs in 4 spectral types + Microprocessor control of time & intensity / Remote control & reporting via PC or PLC + Integrated Lamp head, power supply and controller + Optional shielded benchtop curing chamber SkyRay + Rayven + Curing area: 5" x 5" + Up to 2200 mW/cm2 Intensity @ 1" + Cool-output Long-life LEDs available in 4 spectral types + Shielded benchtop curing chamber + Forced air w/ louvers, channeled from lamp head + Curing area: 5"...