INTELLIRAY 400 / 600 UV Flood Curing System PN: UV0338 / UV0832 The INTELLIRAY is a compact programmable UV flood curing system. The INTELLIRAY integrates all system components into a small lamp head which can be easily mounted anywhere on a factory floor - virtually no cabling or remote control boxes required. Just mount the head, connect the AC line cord, and start timed exposure curing! The system contains an integrated retractable shade type shutter, which allows for repeatable exposure timing and shields the user from UV radiation. The system’s LCD display and digital keypad make programming and monitoring of curing operations a snap. The long life 400 or 600Watt metal halide type lamp and parabolic reflector illuminate an 8 x 6 inch curing area with evenly distributed 115 mW/cm2 (400W) or 175 mW/cm2 (600W) UVA light (320–390nm). FEATURES + System Timers Duration of curing is controlled by a 1 to 9999 second or hour exposure timer that actuates the shutter. The exposure timer also has a user controlled manual mode in which exposure time increments on the display to indicate elapsed time of a cure. A second timer is used to display the age of the lamp in hours, and triggers a panel-mounted light to warn the user when the lamp should be replaced. + Lamp Intensity Control The system has a user adjustable intensity level. This feature provides the flexibility of choosing appropriate curing intensity for sensitive materials. + Standby mode The unit automatically reduces lamp power by one half when the shutter is closed. This reduces excessive heat and therefore increases life of system components, without the need to power down. IntelliRay mounted on optional Rayven oven Uvitron International  150 Front St, Unit 4  West Springfield, MA 01089 (413) 731-7835  www.uvitron.com  i

+ Status Indicators Four front panel LEDs are provided: Lamp ready, system in standby mode, shutter open, and system alarm. + External logic signal interface The system can be remotely monitored and controlled using logic signals available at a 15-pin D-sub connector on the unit’s rear panel. The digital logic functions allow high-speed control of the IntelliRay for applications requiring a direct interface with machine controllers or PLCs. + Remote control via PC serial port IntelliRay software interface screens The system can also be remotely controlled via an RS232 / RS485 serial port. A Windows™...