Individual customer solutions - Examples Not a regular job. | ~f JmINDIVIDUAL CUSTOMER SOLUTIONS General Accessories Technical Conductive Specialised Products for Dollies Pallet boxes Pallets Space-saving Small load EUROTEC RAKO / Cases Component Individual The company information plastic parts products ESD products food industry containers carriers VDA holders customer

Not a regular job. A solution for every task Sometimes, tasks based on individual customer requirements can be solved by the modification of standard containers. However, they often require totally new ideas and solutions. Box for the transport of ball bearings Fish container This transport container for fish consists of three elements, an e-performance container, a plastic insert and a matching lid. After the fish is placed on the insert, the container is filled with ice. Melted water flows through appropriate openings into the cavities under the insert. This new meat container replaces the...

INDIVIDUAL CUSTOMER SOLUTIONS Autostore container with dividers EUROTEC with dividers UPAL-V with RFID transponder Special containers offered by Autostore for an automated storage system with notches at the short and long walls for compartment dividers. This EUROTEC 600 x 400 x 220 mm has grooves injected into the internal walls of the longitudinal sides, which are able to incorporate dividers, if necessary. A UPAL-V, comprised of individual components and replaceable in the event of repairs, was fitted with RFID transponders to identify the pallet.

EUROTEC and RL-KLT with retractable flap A retractable side wall was attached to the short side of a EUROTEC and an RL-KLT. This enables access to the container contents while stacked. Layer Tray 800 x 1000 mm Trays are used when different packaging, usually consisting of cardboard, must be transported on automatic conveyor systems. The boxes are placed on the tray running on the conveyor system. If the tray is stored on a shelf, even the rear boxes can be pulled into the work area with a pushing device. Container for gaskets This container is used to transport cylinder head gaskets for engines by...

INDIVIDUAL CUSTOMER SOLUTIONS Container for coffee pads Tins mechanically filled with coffee pads are automatically inserted into the nests of this container. The tins are transported to the POS in the containers. Container with matching inserts for paternoster storage These are thermoformed containers with matching dividers to assist in the sorting of small parts. The entire unit is placed on one level of the paternoster, making this container a genuine alternative to visible storage boxes. Engine frame A simple solution for transporting cylinder heads to the assembly line: the parts are placed...

FixFlat module pallet “Glas Manager“ Solar modules are attached to the FixFlat module pallet with clamping devices. The entire construction is used on flat roofs, especially when the roof’s load capacity is so low that previous metal constructions could not be used for weight reasons. Base boards for concrete blocks Fired concrete blocks are stored on this load carrier for cooling purposes. To ensure the appropriate stability, two pallet halves are welded together. The carrier plate consists of WPC (Wood Plastic Composite), a mixture of the renewable resource wood and PP. These inserts developed...

RAKO used for drilling tools This container transports vertically upright drills. The bottom part of the deep drawn insert is attached with a snap lock. The clear cover, height adjustable due to the grid, serves to protect the drills during removal. Conveyor aid A special container, developed for a package distribution centre, with elastic mounting belts inside and barcode labels attached to both the exterior and interior walls. KLAPA with workpiece carriers Workpiece carriers in a metal frame are inserted into a KLAPA Special. The workpiece carriers are used to transport assembly parts for the...