MATRIX II
8Pages

® LOAD CELLS - WAGEZELLEN ■ Alphanumeric Weighing Indicator with graphic monochrome display 240x128 pixels. ■ OIML R76 & EN 45501 Approved, monorange or Multi-range. ■ Calibration and configuration by keyboard and/or remote by communication port. ■ Single Scale Connection for analog load cells (Ref.89400) or digital load cells (Ref.89400D) enlarged to Double Scale Connection by additional interface boards. ■ Time & Date. ■ Several connectivity possibilities: • Two RS-232 ports: Bidirectional for PC communications, printer or remote display. • One RS-485 port: Network communications up to 1200m. Additionally, it's possible to be connected with external dispositives of digital I/O, analog outputs, relay boards, etc. • One additional free port: to extend the indicator to several fieldbuses. ■ Integrated front panel alphanumeric keyboard and connector for an external standard Pc keyboard (PS/2). ■ Universal power supply 100-240 V AC 50/60 Hz and 10-24 V DC ■ Stainless Steel enclosure. Desktop or Panel mounting. Optional: Wall mounting kit. ■ Multi-range: Allows two working ranges for two division sizes. ■ Configurable Ticket. ■ Linearity correction. ■ Metrological sealing for easy maintenance: Software sealing by internal calibration counter, or mechanical sealing for blocking calibration switch. ■ Microprocessor of 32 bits, with Flash memory that allows the software update through a serial port for loading new applications. ■ Selectable applications: Weighbridge, industrial, dosing.

ADDITIONAL CHARACTERISTICS: 89400 MATRIX II Indicator for analog load cells: • A/D 24 bits, 16 millions internal div.; 100.000 external divisions; 50 reading/sec. Power up to 8 load cells (350 Q) or up to 16 load cells (700 Q), at 6 V DC excitation. 6000 div. at 0,6 juV/d approval. • Milivolt pre-calibration: Allows start-up without calibration masses by entering the load cell nominal capacity and nominal sensitivity in mV/V. 89400D MATRIX II DIGITAL Indicator for digital load cells: • Power up to 16 digital load cells. Distance between the Indicator and the scale up to 1200m. • Digital...

MATRIX II ALPHANUMERISCHES WÄGETERMINAL MIT GRAFIKANZEIGE Wägeterminal für analoge Wägezellen 89400D MATRIX II DIGITAL Wägeterminal für digitale Wägezellen  Alphanumerisches Wägeterminal mit grafischer monochromer Anzeige 240x128 Pixel.  Alphanumerische Tastatur und Buchse für PC Standardtastatur (PS/2).  Zulassung nach OIML R76 & EN 45501, für Einbereichs- oder Mehrbereichswaagen.  Kalibrierung und Konfiguration über Tatstatur und /oder Remote über die Schnittstellen.  Edelstahlgehäuse für Tisch- oder Schaltschrankmontage, optionaler Wandmontagesatz.  Wägeterminal mit einem...

WEITERE EIGENSCHAFTEN: 89400 MATRIX II Terminal fur analoge Wagezellen • A/D 24 Bit, 16 Millionen interne und 100.000 externe Teilungswerte, 50 Messungen/Sek. Speisespannung 6 V DC fur bis zu 8 Wagezellen (350 Q) oder 16 Wagezellen (700 Q). Zulassung 6000 Teile bei 0,6 juV/D. • Numerische Kalibrierung ermoglicht Waagenbetrieb ohne Kalibrierung mit Gewichten nur durch Eingabe des Nenn-bereichs und des Nennkennwertes der Wagezelle in mV/V. 89400D MATRIX II DIGITAL Terminal fur digitale Wagezellen: • Speisespannung fur bis zu 16 digitale Wagezellen, maximale Entfernung zwischen Wagetermial und...

acc. 89404 acc. 89405ACC. RS-232/RS-485 OPTO-iSOLATED EXPANSiON PORT MATRiX il ACC. RS-232/RS-485 OPTIScH iSOUERtER KOMMuNIKATIONSKANALMATRIX ii89404 RS-23289405 RS-485 ■ 1 additional serial port RS-232 (Acc. 89404) or RS-485 half-duplex (Acc. 89405). ■ Automatic detection as MATRIX II COM4. ■ Galvanic isolation between MATRIX II and peripheral. ■ Configurable communication parameters (up to 115200 bps). ■ Communication with printer, remote display, computer or other equipments. ■ Mounted inside of the MATRIX II without welding. ■ Transport weight: 0.06 kg. Additional specifications for...

m UTILCELL ^h^J® LOAD CELLS - WAGEZELLEN This module is an external board assembled on a DIN rail with: ■ Analog output: 0-5V, 0-10V, 0-20mA or 4-20mA ■ Power supply: 12 - 28 V DC / 2.5 W. ■ Connection to Matrix II (COM3 or COM4) by a high speed RS-485 bus (115200 bps) with communication status LEDs. ■ MATRIX II indicator admits up to 2 modules in the same RS-485 bus (one per installed scale). ■ Assembly on standard 35 mm DIN rail. Externes Modul zur Montage auf DIN Hutschiene: ■ Analogausgang: 0-5V, 0-10V, 0-20mA oder 4-20mA ■ Stromversorgung: 12 - 28 V DC / 2.5 W. ■ Schnelle RS-485...

m UTILCELL ^h^J® LOAD CELLS - WAGEZELLEN This module is an external board assembled on a DIN rail with: ■ 8 digital contact relay outputs, with several functions like: level indication or alarms (setpoints), barriers and traffic lights control at weighbridge, valve control for dosing, etc. ■ 8 digital inputs: for connection to external pannels of push buttons or to plc, to activate funtions such as zero, tare, printing, and the external signals needed for a dosing control. ■ 8 relays 125 V AC/1 A or 30 V DC/1 A, with LEDs to indicate the state. ■ 8 inputs (max. 24 V DC) with LEDs to...

Transport weight - Transportgewicht: 0.36 kg INSTALLATION / ANSCHLUSSPLAN: RELAY OUTPUTS / AUSGANGSRELAIS INPUTS / EINGÄNGE