TENSORAPID 5
1 / 10Pages

u TENSORAPID 5 The strength measurement system Technical Data

USTER  TENSORAPID 5 The strength measurement system ® Tensile testing and analyzing instrument for the yarn quality assurance of a wide variety of yarns and fabrics. of the USTER ® TENSORAPID  5 installation Basic installation 7 Unwinding device (no illustration) 8 Special clamps 180 ° with booster (no illustration) 9 Clamps for skein tests (no illustration) 10 Clamps for fabric tests (no illustration) 11 Reductions clamps (no illustration) 12 Vibration suppressor (no illustration) 1 Test unit – Sensor for force and elongation – Sensor for temperature and humidity 2 Clamping device 3 Finger...

USTER  TENSORAPID 5 The strength measurement system ® Basic installation Functions – Measurement of tensile strength and elongation of an extensive range of yarns and fabrics – Analysis, evaluation and storage of measurement values – Automatic check of all measured values – Automatic comparison with the benchmarking tool USTER ® STATISTICS – Editor for customizing reports and setting of mill limits – Smart view focusing on exception and outliers – Filter functions for quick data selection and for the preparation of long-term reports Overall Installation – Test unit – Control unit –...

Elongation measuring arrangement Clamp speed Pre-tension Test lengths Elongation measuring range Yarn changer Yarn clamps Control unit (2) Computer software Computer hardware Computer accessories - Electronic elongation measurement - Measuring accuracy for force and elongation measurement: for force ± 1 % (above 100 cN) or ±1 cN (below 100 cN), and for elongation ±1 % Continuously adjustable between 50 and 5 000 mm/min Adjustable between 0.5 and 6 000 cN - With horizontal position of clamps: continuously adjustable between 200 and 1 000 mm - With vertical position of clamps: continuously...

USTER  TENSORAPID 5 The strength measurement system ® Options Reduction clamps (11) Application range Clamps for fabric tests (10 ) Application range – Testing of woven fabric strips according to DIN 53857 (50  mm width) – Testing of fiber assemblies for the adhesion test Application range Allows quick sample control of whole bobbins due to unwinding of long yarn pieces between the measurements with winding speeds up to 400  m/min Clamps for skein tests (9 ) Application range Clamps for the testing of the skeins (hank test) according to ASTM standard D 1578 For measurements of material with...

USTER  TENSORAPID 5 The strength measurement system ® Application software Live view report during the measurement – Analysis tool with all measured data and graphical output – Smart view report for exceptions and outliers – Automatic printout possibility after the measurement Setting of customized limits according to the USTER ® STATISTCS , standard deviation, relative and absolute values – Automatic verification of the measured value – Measured values which exceed the limit will be marked with red or purple color in the report Time from the start of measurement to the break of the sample...

USTER  TENSORAPID 5 The strength measurement system ® Statistical values – Mean value – Standard deviation s – Coefficient of variation CV – Q95  % confidence interval – USP ™ (USTER ® STATISTICS Percentile) – Minimum value – Maximum value USTER ® STATISTICS – Comparison of measured values with the USTER ® STATISTICS – Material-dependent USTER ® STATISTICS are stored in the data-base – Setting of limit values based on the USTER ® STATISTICS Stroke diagram Available for breaking force and elongation or tenacity and elongation Available for force and elongation or for other results...

USTER  TENSORAPID 5 The strength measurement system ® General General ambient conditions Room climate The ambient conditions must be maintained in order to avoid any influencing of the test material according to ISO 139 ( 2015 ) – Humidity: 65 ±4  % – Temperature: 20 ±2 ° Standard atmosphere Installation data Electrical connection Single-phase mains with protective conductor Nominal voltages Mains frequency Power consumption – Air quality: according to ISO 8573 .1, class 3 – Min. pressure at inlet of air filter regulator: 6 bar – Max. pressure at inlet of air filter regulator: 7 bar 18  m...

USTER  TENSORAPID 5 The strength measurement system ® Space required for the USTER®  TENSORAPID 5

Uster Technologies has made all possible efforts to ensure that all information is accurate at the time of publication. Hereby it is declared that alterations to the product may be possible at any time. In these cases the information contained in this technical datasheet is subject to change without notice. December 2017 USTER Switzerland 12.17/© Copyright 2017 by Uster Technologies AG Adana, Turkey Suzhou, China •• Shanghai, China Coimbatore, India