Overview: The HTM 1500 and HTM 2500 are surface drill rigs manufactured in Val d’Or, Canada, known for their performance and reliability in underground drilling projects. They feature simple mechanics, robust head assembly, and safety devices, making them a reference in Canada.
Power Unit: The HTM 1500 is equipped with a Cummins QSB6.7 engine, 190 HP, operating at 2400 RPM. The HTM 2500 uses a Cummins QSB6.7-P engine, 260 HP, at 2000 RPM. Both models have a fuel tank capacity of 205 liters and include a fuel filter and water separator.
Wire Line: The drum capacity is 3048 meters with a line pull of 21KN and a line speed of 550 meters/minute.
Dimensions and Weight: The HTM 1500 weighs approximately 11,330 kg, while the HTM 2500 weighs about 14,090 kg. Dimensions are provided for height, length, and width.
Hydraulic Components: The rigs feature a fuel tank capacity of 605 liters, three pumps with varying capacities, and full flow filtration at 10 microns. An optional air/oil cooling system is available.
Water Pump: Standard pump capacity is 140 liters/minute, with other options available on demand.
Rod Handler: Features include a rod rack for 30 ft rods, two patented safety handling clamps, and optional HWL & PWL handling.
Drill Mast: The mast allows for a drilling angle of 43° to 92° and supports a maximum rod length of 9 meters. Feed cylinder specifications and optional casing clamp and wire line are noted.
Accessories: Various accessories are available, including synchronization systems, heaters, torque control, and high-efficiency LED lights.
Drill Head: The drill head includes a Boyles HWL chuck, Funk HMD2355 transmission, and a Rexroth 160 variable hydraulic motor. RPM and torque specifications are detailed for each gear.
Depth Capacity: The HTM 1500 and HTM 2500 have different depth capacities depending on the ground formation, with maximum depths specified for BWL, NWL, HWL, and PWL.
