Catalogs >
U.S. GAUGE >
Sta-Kool-Cooling-Element

Sta-Kool-Cooling-Element
2Pages

Catalog excerpts

Product Data PROCESS GAUGE ACCESSORY Sta-Kool™ Cooling Element DESCRIPTION Extreme process temperature reduces the accuracy, reliability, durability, and the overall life of a pressure gauge. The AMETEK U.S. Gauge (USG) Sta-Kool™ cooling element was designed for pressure measurements with this extremely high temperature environment in mind. Under actual laboratory testing condition, in still room air, the 316L stainless steel Sta-Kool™ cooling element was able to reduce 400°F (204°C) liquid process temperature down to 100°F (38°C) at the active portion of the Bourdon tube (see chart 1 on next page). AMETEK USG recommends using a Sta-Kool™, capillary or diaphragm seal to protect pressure gauges, pressure transmitters or pressure switches (not supplied by USG) from process temperatures exceeding 190ºF. Anything exceeding 190ºF will start to degrade weld joints and electronics. The Sta-Kool™ can be either threaded or welded (to eliminate a potential leak path) to any pressure gauge with 1/2" NPT male connection made out of compatible material. Model 1981 Process Gauge with Sta-Kool™ Cooling Element (gauge sold separately) Furthermore, the Sta-Kool™ cooling element can be attached in between a pressure gauge and diaphragm seal for the most comprehensive process measurement protection possible, protecting the instrument from pulsation and temperature extremes. ø 1.25 CONNECTION: 1/2-14 NPT male X 1/2-14 NPT female BODY MATERIAL: 316L stainless steel WEIGHT: 15 oz. (0.4 kg) OPERATING PARAMETERS: 5000 psi maximum at 100°F (38°C) 750ºF (400°C) maximum at 3500 psi INCHES (MM) Sta-Kool Spec Number Selection Chart Spec No. Sta-Kool 316L SST cooling element On-line order fax: +1 215-323-9450 or e-mail: usg.sales@ametek.com Sales/Technical Support: +1 215-293-4100 | 205 Keith Valley Road | Horsham PA 19044 U.S.A. © 2013, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. PDF513 (160174) Specifications are subject to change without notice. Visit our Web site for the most up-to-date informat

Open the catalog to page 1

PROCESS GAUGE ACCESSORY Sta-Kool Cooling Element HEAT SOURCE TEMPERATURE REDUCTION PROFILE Results based on actual laboratory environmental condi- tions and is to be used as reference only. Actual usage results in the field may vary based on additional process parameters subjected to the device. TEMPERATURE CURVE GAUGE AND COOLING ELEMENT ASSEMBLY ▲ A^E^PE V'® On-line order fax: +1215-323-9450 or e-mail: usg.sales@ametek.com mlwIE I EIV Sales/Technical Support: +1 215-293-41001205 Keith Valley Road I Horsham PA 19044 U.S.A. ©2013, by AMETEK, Inc. All rights reserved. Printed in the U.S.A....

Open the catalog to page 2