Catalogs >
U.S. GAUGE >
SOLFRUNT® Model 1929 4-1/2” Low Pressure Gauges

SOLFRUNT® Model 1929 4-1/2” Low Pressure Gauges
2Pages

Catalog excerpts

SOLFRUNT® Model 1929 4-1/2” Low Pressure Gauges - 1

Specifications are subject to change without notice. Visit our Web site for the most up-to-date information. Sales/Technical Support: 215-257-6531 Customer Service: 727-536-7831 900 Clymer Avenue 8600 Somerset Drive Sellersville, PA 18960 U.S.A. Largo, FL 33773 U.S.A. © 2008, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. 908PDF (160166) ALL ORDERS CAN BE SENT TO: On-line fax: 215-323-9450 or e-mail to usg.sales@ametek.com DESCRIPTION Designed for pressure measurements as low as a few inches of water, these gauges, in spans from 30” H2O to 10 psi utilize a unique sensing element. It is composed of a stack of diaphragm capsules, each consisting of two plates contoured into a convex/ concave configuration to nest into one another. This results in a low internal volume element developing large forces to drive the mechanism in extremely low pressure ranges. The measuring element may be filled and attached to a Mansfield & Green diaphragm seal (Type L) to permit use of the gauge with corrosive or viscous fluids. Type ST diaphragm seals may also work on Model 1929. Please contact factory for further information. Calibration adjustments (scale shape and linearity) are made from rear of case without removing internals. The pointer is adjusted by removing the front ring and window. STANDARD DIAL RANGES MAXIMUM INDICATION FIGURE INTERVALS INTERMEDIATE GRADUATIONS MINOR GRADUATIONS 0-30” H2O VAC 5 1 0.2 0-60” H2O VAC 5 1 0.5 15”-0-15” H2O 3 1 0.2 30”-0-30” H2O 5 1 0.5 60”-0-60” H2O 10 5 1 0-30” H2O 5 1 0.2 0-60” H2O 5 1 0.5 0-100” H2O 10 5 1 0-200” H2O 20 10 2 0-3 psi 0.5 0.1 0.02 0-5 psi 1 0.25 0.05 0-10 psi 1 0.5 0.1 SPECIFICATIONS DIAL SIZE: 4-1/2” CASE AND RING: For Stem or Wall Mounting: PET TURRET CASE (black) with glass-filled, threaded, polypropylene ring and plastic pressure-relieving back WINDOW: Acrylic POINTER: Knife-edged, micrometer adjustable, black finish DIAL: Aluminum with white background and black markings MOVEMENT: Heavy brass U-frame construction with nickel silver rocker arm on stainless steel pivots. Brass sector and nickel silver pinion operate on brass bearings. Minimum and maximum stops prevent segment and pinion disengagement DIAPHRAGM: 316L stainless steel, heli-arc welded CONNECTION: 316L stainless steel; 1/2-14 ANPT standard (1/4-18 ANPT optional) ACCURACY: ±1% of span (Grade 1A) Process Gauges SOLFRUNT® Model 1929 4-1/2” Low Pressure Gauges Model 1929

Open the catalog to page 1