ADJ
2Pages

Catalog excerpts

Temperature Products Model ADJ 3” and 5” Adjustable Angle Industrial Bimetallic Thermometers DESCRIPTION U.S. Gauge offers 3” and 5” heavy duty, industrial bimetallic thermometers with a versatile case and stem that can be adjusted to almost any angle for easy viewing. The head can be rotated 360º and the stem positioning moves over 180º. These thermometers are rugged and preferred by the process, offshore, power, pharmaceutical, Model and chemical industries. ADJ The union connection is 1/2-14 NPT, but others are available. The thermometers may be silicone filled for additional vibration dampening (5” only) . The standard lens material is glass. Standard stem diameter, up to 12” long, is .25”. Other available stem sizes are .24” (6mm), .32” (8mm), and .375” (9.52mm). SPECIFICATIONS STEM DIAMETER: .25” standard up to 12” stem CONNECTION: 1/2-14 NPT EXTERNAL RESET: Standard CONSTRUCTION: 304 stainless steel external parts and welded construction; corrosion resistant to most chemicals HERMETIC SEAL: Per ASME B40.3, dustproof and leakproof HARNESS: All stainless steel brackets with screws that loosen to allow 360º rotation of head and 180º adjustment of stem position BELLOWS: Heavy-duty flexible stainless steel, hermetically sealed at case and connection; protects mechanism that transfers temperature DIAL: Cupped anti-parallax dial, easy to read from any angle, minimizes reading errors; anodized aluminum with large black numbers and graduations. Outer scale in Fahrenheit; inner scale Celsius. LENS: Glass BIMETALLIC COIL: Helix coil is silicone coated on ranges below 500ºF for vibration dampening and to maximize heat transfer and response time ACCURACY: ±1% full span per ASME B40.3 Grade A; adjustment of the angle between case and stem may affect accuracy up to 0.5% of span (ASME B40.3) OVER TEMPERATURE LIMITS: Up to 250ºF, 100%; 250º to 550ºF, 50%; 550º to 1000ºF, continuous use up to 800ºF, intermittent use over 800ºF A MODEL UNIT A B ADJ-3 inches mm 2.300 58.42 3.134 79.60 ADJ-5 inches mm 2.631 66.83 5.001 127.03 B 1.626 (41.3) .592 (15.04) 1/2-14 NPT INCHES (MM) ø.25 (6.35) STANDARD STEM LENGTHS 2.5 (63.5) 4 (101.6) 6 (152.4) 9 (228.6) 12 (304.8) ALL ORDERS CAN BE SENT TO: On-line fax: 215-323-9450 or e-mail to usg.sales@ametek.com © 2008, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. 908PDF (160166) Sales/Technical Support: 215-257-6531 900 Clymer Avenue Sellersville, PA 18960 U.S.A. Customer Service: 727-536-7831 8600 Somerset Drive Largo, FL 33773 U.S.A. Specifications are subject to change without notice. Visit our Web site for the most up-to-date information.

Open the catalog to page 1

Temperature Products Model ADJ 3” and 5” Adjustable Angle Industrial Bimetallic Thermometers SPEC NUMBER SELECTION CHART Model ADJ-3 Connection 3” Dial Size Temperature Range* 2-1/2” Stem Length 4” Stem Length 6” Stem Length 9” Stem Length 12” Stem Length Spec No. Spec No. Spec No. Spec No. 415002C 415008C 415014C 415020C 415026C 0º to 250º FC 1/2-14 NPT Spec No. 0º to 200º FC 415003C 415009C 415015C 415021C 415027C 50º to 300º FC 415004C 415010C 415016C 415022C 415028C 50º to 400º FC 415005C 415011C 415017C 415023C 415029C 50º to 550º FC 415006C 415012C 415018C 415024C 415030C 200º to...

Open the catalog to page 2