URSCHEL® MODEL CCX-D
2Pages

URSCHEL® MODEL CCX-D HIGH CAPACITY VERSATILE SHREDDER, SLICER, & STRIP CUTTER ‡‡ The Model CCX-D Shredder (MCCXD) features a large 32" (813 mm) diameter cutting zone. This large cutting zone combined with the 10 horsepower motor promotes a higher capacity and lessens product build-up. The machine is also available with a 24" (610 mm) diameter cutting enclosure. New 2-piece enclosure allows easy access for complete cleaning and maintenance. The versatile CCX-D features interchangeable quick locking double ring, single adjustment cutting heads enabling the changeover to different cuts in just minutes. Specially designed knives do not require sharpening, and are inexpensive to replace. To promote sanitation, the machine features an attached swingaway feed hopper, hinged access panels, sloped surfaces, and stainless steel highly polished to U.S.D.A., Dairy Division accepted standards. The machine features continuous operation for uninterrupted production, and is designed for easy clean-up and maintenance. The Model CCX-D will accept products measuring up to 3-1/2" (88.9 mm) in any dimension. FULL SHREDS & REDUCED V SHREDS Full Shred: Diamond-shaped cross section available in four thicknesses: .070, .097, .125, *.285" (1.8, 2.5, 3.2, or *7.2 mm). Reduced V Shred: “V”-shaped cross section OVAL SHREDS .250 Oval Shred: Oval-shaped cross section approximately .125" (3.2 mm) thick by .250" (6.4 mm) wide. CRESCENT SHREDS Crescent-shaped cross section. WIDE OVAL SHREDS .480 Wide Oval Shred: .152" (3.7 mm) thick by .480" (12.2 mm) wide. † WIDE CRESCENT SHREDS Wide crescent-shaped cross section † FULL & REDUCED FLAT-V® SHREDS Full Flat-V Shred: Hexagonal-shaped cross section approximately .150" (3.8 mm) on all sides. Reduced Flat-V Shred: Flattened top and bottom that form a corrugated shred. 1 1 2 2 FLAT SLICES Slice thickness up to .500" (12.7 mm) FLAT-V® SLICES Slice thickness up to .180" (4.6 mm) with 2.1 corrugations per inch. Corrugation depth of .125" (3.2 mm); Centers: .473" (12 mm). † *Z-CUT SLICES Slice thickness up to .325" (8.3 mm) with 2.1 corrugations per inch. Corrugation depth of .135" (3.4 mm); Centers: .394" (10 mm) † V SLICES Slice thickness up to .500" (2.5 mm) .125" Slice: 8 complete “V’s” per inch. “V” depth of .050" (1.3 mm); Centers: .125" (3.2 mm). .212" Slice: 4.7 “V’s” per inch. “V” depth of .084" (2.1 mm); Centers: .212" (5.4 mm) CRINKLE SLICES Slice thickness up to .500" (12.7 mm) with 3-1/2 waves per inch. .175 Slice: Crinkle Depth .084" (2.1 mm), Centers .175" (4.4 mm), .300 Slice: Crinkle Depth .080" (2.0 mm), Centers .300" (7.6 mm). .480 Slice: Crinkle Depth .076" (1.9 mm), Centers .480" (12.2 mm). STRIP CUTS Rectangular cross section. Widths: 3/32, 1/8, 3/16, 1/4, 3/8, 1/2, 9/16, and 3/4" (2.4, 3.2, 4.8, 6.4, 9.5, 12.7, 14.3, and 19 mm) GRATING OPTIONS Grating heads offer cuts including powdered parmesan, coarse granules, and a variety of shreds. *Limited availability based on customer application. Contact your local Urschel office to verify salability. † Not all components in these cut types may be available in highly polished U.S.D.A., Dairy Division accepted stainless steel finish. CUTTING OVERVIEW 1. Impeller Paddle 2. Shredding Knife If your product application is not mentioned on this page, contact your local Urschel representative to determine the most

SPECIFICATIONS & DIMENSIONS The Model CCX-D is accepted by the U.S.D.A, Dairy Division. The Model CCX-D (both 24" and 32" diameter enclosures) are available with an optional caster frame. Dimensions will vary depending on customer requirements. Contact your local Urschel representative for additional information. TEST CUT YOUR PRODUCT Contact your local Urschel representative to schedule a comprehensive, no-obligation test-cut of your product: www.urschel.com. ® Urschel logo symbol, Urschel, The Global Leader in Food Cutting Technology, and Flat-V are registered trademarks of Urschel...