BRANCH LOGGERS URBAN
8Pages

{{requestButtons}}

Catalog excerpts

BRANCH LOGGERS URBAN - 2

EFFECTIVE USAGE OF WOOD WASTE URBAN Branch loggers process wood (branches, laths and offcuts) which would usually be chipped up or left on site. The smaller logs produced can then be utilised as a valuable source of solid wood fuel. The advantages of small logs: • possibility of burning in solid fuel boilers, hearths and log burners • easy storage and handling in raschle bags or big bags • faster drying Small logs from 70 series of branch loggers THE PRINCIPLE The working principle of branch loggers URBAN lies in two counter rotating shafts with blades. Each shaft has 3 fixed blades, made...

Open the catalog to page 2
BRANCH LOGGERS URBAN - 3

Maximal branch diameter: Models being produced: • with a double bagging frame for raschle bags • with a big bag frame • with a 2,1 m side belt conveyor - driven by a hydraulic motor with rotation speed control • with a 2,6 m side belt conveyor - driven by a hydraulic motor with rotation speed control • with a 2,6 m back belt conveyor - driven by a hydraulic motor with rotation speed control The URBAN TR70 branch logger is driven by a PTO with an overload clutch which will slip and limit the torque when a large branch is fed into the hopper. Providing the tractor and the logger with...

Open the catalog to page 3
BRANCH LOGGERS URBAN - 4

Models being produced: • with a double bagging frame for raschle bags • with a 1,7 m belt driven conveyor • with a 2,1 m belt driven conveyor The branch logger and the drive are the same as with the SM70 a SMV70 models, differing only in the chassis. The SMH70 features a road trailer with a lighting kit and number plate bracket. Connects to a vehicle with a 50 mm dia. tow ball.

Open the catalog to page 4
BRANCH LOGGERS URBAN - 5

URBAN SMH110 Maximal branch diameter: URBAN SMH110 is mobile and highly efficient. It is driven by a 35 hp Briggs & Stratton VANGUARD engine with electric start, an oil level and fuel indicators and an hour meter. The SMH110 is mounted on a highway use braked single axle trailer with road lighting kit and number plate holder. The branch logger is fixed to a 360° turntable to allow the branch logger to be rotated in eight lockable positions in 45° increments. A belt slip protects the device from overloading. Model being produced: • with a 2,6 m belt driven conveyor All URBAN branch loggers...

Open the catalog to page 5
BRANCH LOGGERS URBAN - 6

EM70 differs from SM70 only in motor type - it is driven by a three phase 5,5 kW SIEMENS electric motor. The chassis has wheels for manual handling (2 fixed and 2 swivelling, with brakes). Maximal branch diameter: Soft fresh wood (spruce, pine tree) 80 mm Hard fresh wood (oak, hornbeam) 65 mm | Hard dry wood (oak, hornbeam)50 mm Log length (not adjustable) 6 - 13 cm Logging device inlet dimensions 200 x 200 mm Electric motor power 5,5 kW Blade rotation speed 200 / min. Models being produced: • with a single bagging frame for raschle bags • with a double bagging frame for raschle bags • with...

Open the catalog to page 6
BRANCH LOGGERS URBAN - 7

SMALL LOGS HANDLING POSSIBILITIES RASCHLE BAGS · recommended dimensions of a raschle bags are 57 x 104 cm. The · mass of 1 bag with logs is from 15 to 30 kg. The · volume of 1 bag is 0,08 m3 (13 bags = 1m3). The + Easy handling + Minimised storage area by stacking bags + Faster drying due to improved air circulation + 50 FREE raschle bags are provided with units supplied with bagging frames · recommended dimensions of big bags are 90 x 90 x 100 cm. The · mass of 1 big bag with wood logs is from 150 to 300 kg. The · volume of 1 big bag is 0,8 m3. The + Higher performance during logging +...

Open the catalog to page 7
BRANCH LOGGERS URBAN - 8

Company has manufactured more than 1000 Branch Loggers since 2009. KOVO s.r.o. is Czech producer of Branch Loggers. KOVO s.r.o. have an on site CAD design facility continually improving products. components are made on site, assuring quality. and Maintenance can be carried out at our facility, for example sharpening and setting of blades. Parts are readily available through your dealer. site address: Lovčice 3 CZ - 503 61 Lovčice invoice address: Petra Bezruče 283/III CZ - 503 51 Chlumec nad Cidlinou You are welcome to visit our showroom any week day between 7am and 6pm (24 hours notice...

Open the catalog to page 8