ATEX product range - Better safe than sorry!
12Pages

ATEX product range Better safe than sorry

Top performance requires a strong heart Industry standard URACA plunger pumps are designed for uninterrupted heavy duty operation 24 hours a day – for decades. Variety The optimum pump of URACA’s product family for each unit. Energy efficiency URACA products achieve highest efficiency. Cost-effective – year in and year out. Quality URACA high pressure plunger pumps are manufactured in-house considering the highest quality standards. Know-how Since more than 120 years, URACA is manufacturing high pressure pumps. Performance Maximum pressure level and maximum flow rate. Not only on paper....

URACA • ATEX product range URACA and ATEX Time and again explosive atmospheres may occur during chemical and engineering processes. May it be caused by gases, vapours, mists or dusts in combination with oxygen: URACA products are basically also suitable for use in explosive areas. They are designed and built in a conformity assessment procedure in accordance with the ATEX product directive 94/9/EC. Equipment group II Equipment category Hazard assessment Probability of the presence of an explosive atmosphere Probability of taking effect of an ignition source Zone dust Meaning and structure...

Pump units customized for your requirements High pressure pump units from URACA are basically also suitable for use in explosive areas. They are designed and built in a conformity assessment procedure in accordance with the ATEX product directive 94/9/EC. This applies for all pump units built for process industry and high pressure cleaning as well as for hydrostatic pressure testing. From small to large. Pressure test unit EP601 D/160 EEx Pressure test unit DP3-10 E/400 EEx Pressure test unit DP708 E/1200 EEx High pressure pump unit RS724 EEx for descaling

URACA • ATEX product range High pressure pump unit P5-70 with resonator and lube oil system High pressure pump unit P3-96 for coal slurry Design may be subject to modification. Weights, dimensions, illustrations and technical data are non-binding.

Positioning devices in all automation levels To meet the diverse requirements of designed, developed and produced in the internal vessel cleaning with the accordance with the most stringent different deposits, URACA has opted demands. Of course the positioning for an individual, modular cleaning. devices can be used in explosive areas URACA sets on an individual, modular if necessary. Many of our cleaning cleaning system with neatly combina- devices had been built according to ble components that can be added as the ATEX directive and are used under required. Every individual element is...

Combined gas-tight knee system for automatic internal cleaning of vessels with built-in components

Safety first – that’s our standard URACA tank cleaning heads TWK series are corresponding to the equipment category 1. They have the type examination certificate which allows the use of the tank cleaning head in all explosive areas including zone 0 and 20. Cleaning heads KBR series for small container may also be used in potentially explosive atmospheres. If needed they can be built according to the ATEX directive. KBR 95-400 according to ATEX directive

URACA ■ ATEX product range Tank cleaning head TWK The TWK tank cleaning head from URACA, driven by high- pressure water, has two opposite-mounted nozzles, at an off-axis angle. The recoil forces of the flowing water cause the rotor to turn. With the simultaneous turning of the TWK on its vertical axis the water jets reach every nook and cranny and thus clean the entire internal surface of the vessel. ztf Mwkimsremp r a dm medium temp. S-70*C id, Ikngebufirjstempf' a dm ombteM temp- 5-70*C

Never the less, if foot valve or spray gun: The safety requirements regarding high pressure tools and accessories has priority with URACA.

URACA • ATEX product range Spray guns and accessories Obviously, the security requirement shall apply to URACA high pressure tools and accessories. Spray guns, rotating nozzles, valves or swivel joints: All products are manufactured in conformity with ATEX when needed.

Our product range: ATEX by default High pressure plunger pumps All types according to ATEX High pressure pump units from small to large – in all performance classes and with different drive and construction variants Positioning devices Cleaning heads flexible, customized solutions from one single right solution – source. From simple TWK- whether standard cleaning systems your needs Spray guns cleaning or removing – Rotating nozzles different applications regulating – solutions for every appliction URACA GmbH & Co. KG • Sirchinger Straße 15 • 72574 Bad Urach • Germany Phone +49 (0) 7125...