TINY HOUSE

Stable foundation" for Tiny House structures 3,5 t or 6,0 t admissible total weight Easy and safe movement of the axes Drawbar detachable Extensive range of accessories available Including CoC (Certificate of Conformity) No minimum order quantity Setup consulting and service External dimension ALxABx AH ca. in mm *AL = Outer length, AB = Outer width, AH = External height, IL = Inner length, IB = Inner width

• Parking brake with release brake valve and spindle brake • CE driving licence required • The chassis becomes approvable via a standard CoC. The Tiny House body itself is assessed as an indivisible load due to the detachable connection to the chassis. • The extremely stable construction of the chassis provides the stability for a 3.0 m wide superstructure.. • Up to an exterior width of 3.0 m, you are within the so-called „ consultation-free area'', i.e. the transport is simply applied for at the responsible district office (road traffic authority) and can be approved area-wide. • For further...

UNIQUE FASTENING - LOAD SECURING The load is secured by a combination of friction force (between the frame and the floor) and positive locking. To secure the load and implement the form fit, a conventional tension belt is used (at the fixed and loose end each with profile hooks). Base plate secured to frame with tensioning straps Lashing eye for 350 daN lashing forceanchored in the base plate Anti-slip covering Anti-slip mat (Friction lock) End stop (positive locking) Lashing point (force fit)

The complete axle unit can be moved forwards or backwards by a total of 420 mm. The distance of 560 mm between the axles must not be changed. The axles can be shifted as required in a 140 mm grid. For this purpose there are prefabricated holes in the longitudinal members. 1. Jacking up the chassis, unhooking the brake rods & removing the fenders 2. Loosen axle & axle angle screws and reattach them to the desired location 3. Position and screw the axis at the desired position 5. Shorten or lengthen the brake linkage as required and have it adjusted by a specialist. 1. Jack up chassis, remove brake...

#HOME UNSINN Fahrzeugtechnik GmbH Rainer Straße 23+25 86684 Holzheim Germany Tel.: +49 8276 5890-0 [email protected] www.unsinn.com/chassis All technical data, measurements and weights are approximate and non-binding. Pictures partly with special accessories, subject to change. Image source: UNSINN Fahrzeugtechnik GmbH