Current Probe H16 1000A / 5A

Product catalog summary

Electrical Characteristics
The H16 1000A / 5A current probe is designed for non-intrusive AC current measurement with a current range of up to 1000 ARMS and a measuring range from 1 A to 1200 ARMS. It features an output sensitivity of 5 mA/A and operates with a load impedance of ≤ 1 Ohm. The probe is sensitive to conductor position with a 0.5% deviation at 50Hz and has a phase shift of 2.5° at 2 kHz for 10A. It covers a frequency range from 30 Hz to 10 kHz and has a temperature coefficient of 0.01%/°C. The working voltage is 600 V ACRMS or DC.

Accuracy
The accuracy varies with the primary current: 2.5% +1 mA for 1 to 10 A, 1.5% for 10 to 100 A, 1% for 100 to 500 A, and 0.5% for 500 to 1200 A. Phase error is specified as 2° for 10 to 100 A, 1° for 100 to 500 A, and 0.5° for 500 to 1200 A.

General Characteristics
The probe accommodates a maximum conductor size of 68 mm in diameter and connects via a 4 mm safety socket. It operates within a temperature range of -10 to +55 °C and can be stored between -40 to +70°C. The operating humidity is ≤ 85%, and the device weighs 1800 g.

Application
The H16 1000A / 5A is suitable for use with multimeters, recorders, power analyzers, and safety testers, leveraging transformer technology for accurate current measurement across a wide frequency range.

Reference Conditions
The probe's reference conditions include a temperature range of +18°C to 26°C, humidity between 20 to 75% RH, and a sinusoidal current frequency of 48 to 65Hz. It assumes no DC current or alternating magnetic fields and a centered primary conductor.

Safety Standards
The probe complies with IEC61010-1: 2010, IEC61010-2-032: 2012, and IEC61010-2-031: 2008 standards, rated for 600 VRMS, Category III, Pollution Degree 2. It is limited to use on uninsulated conductors up to 600 V ACRMS or DC and frequencies below 1 kHz.

EMC Standards
The device meets the EN 61326:1998 standard for electromagnetic compatibility.

Catalog excerpts

1000 Arms 1 A to 1200 Arms 5 mA / A < 1 Ohm 0.5% @ 50Hz < 5mA / A @ 50 Hz 2.5° 30 Hz to 10 kHz 0.01% / °C 600 V ACrms or DC Universal Technic Current Probe H16 1000A / 5A The H16 1000A / 5A current probe has been designed for use with multimeters, recorders, power analysers, safety testers etc. for accurate non intrusive measurement of AC current. Using the latest transformer technology, the H16 1000A / 5A can measure currents from 1 A to 1200 A over a frequency range of 30Hz to 10kHz. Working Voltage (see Safety Standards section) Website : www.universal-technic.com Email : [email protected]

Open the catalog to page 1

Reference conditions: Temperature : +18°C to 26 °C, humidity: 20 to 75% RH, sinusoidal current: 48 to 65Hz, distortion factor: < 1%, DC current: none, DC magnetic field: 40 A/m earth’s magnetic field, alternating magnetic field: none, proximity of external conductor: none, primary conductor: centred in the aperture, load impedance: ≤1Ω for current output. Safety Standards IEC61010-1: 2010 IEC61010-2-032: 2012 IEC61010-2-031: 2008 600 VRMS, Category III, Pollution Degree 2 Use of the probe on uninsulated conductors is limited to 600 V ACRMS or DC and frequencies below 1 kHz. Douilles de Douilles...

Open the catalog to page 2

Current Probe H16 1000A / 5A

Current Probe H16 1000A / 5A

Catalog excerpts

All UNIVERSAL TECHNIC catalogs and technical brochures