*mydirectindustry

CK-series

Product catalog summary

Overview
The document describes the CK series of tube bundle heat exchangers, highlighting their advanced quality, customization options, and European manufacturing. These exchangers are designed for various applications, including marine and safety-critical environments, with options for Atex certification and materials suitable for sea water.

Product Description
The CK series consists of compact heat exchangers with fixed tube bundles, standardized into models with heat exchange surfaces ranging from 0.43 to 40 m². Each model is available in narrow or wide baffle spacing and can be configured as 1-pass, 2-pass, or 4-pass versions.

Product Features

Fixed tube bundle design
Large-bore oil connections for minimal flow resistance
Heat dissipation capacity up to 1360 HP
Oil flow rate up to 400 gallons per minute
Removable end caps for easy cleaning
Maximum pressure: 290 psi on the shell side, 145 psi on the tube side
Various baffle spacing options

Options

Stainless steel version
ASME + TEMA-C version
Sea water compatible version
Safety version

Materials

End plates: Copper-Nickel
Shell: Steel or Copper-Nickel
Mounting bracket: Steel
Type designation plate: Aluminium
Tubes: Copper or Stainless steel
End caps: Cast iron, Brass, or Stainless steel
Gaskets: NBR/cellulose fibre
Baffles: Steel
Optional zinc anode

Technical Data
The performance data is based on maximum flow rates, with a water inlet temperature of 77°F, oil outlet temperature of 122°F, and oil viscosity of 30 cSt. The document advises contacting Universal Hydraulik for different operational conditions.

Ordering Code
The ordering code includes specifications for unit size, baffle spacing, tube diameter, version (1-pass, 2-pass, 4-pass), connection type, and tube material.

Contact Information
Universal Hydraulik GmbH, Siemensstr. 33, D-61267 Neu-Anspach, Tel: 0 60 81/ 94 18 - 0, Fax: 0 60 81/ 96 02 20, Email: [email protected], Website: www.universalhydraulik.com

Catalog excerpts

advanced quality customized designs Your Partner for coolers and systems Tube bundle heat exchangers Individual choice Safety version Atex certification Marine decrease Stainless steel version Special versions

Open the catalog to page 1

Your Partner for coolers and systems Product description Product description The CK is a series of compact heat-exchangers with a fixed tube bundle, which has been standardized into logically-grouped models with a heat-exchange surface of from 0.43 to 40 m2. The models comprise basic units, each divided into two versions (narrow / wide baffle spacing), each also available as a 1-pass version, in a 2-pass and 4-pass version. Product features ■ Fixed tube bundle minimum flow resistance ■ Oil flow rate of up to 400 gal/min ■ Removable end caps for easy cleaning of the tubes ■ Max. pressure: shell...

Open the catalog to page 2

Unit Dimensions CK (inch) A Water inlet -outlet „K“ Water inlet -outlet „M“ Water inlet -outlet „R“

Open the catalog to page 3

advanced quality customized designs made in europe Ordering code SS - CKM - 1014 - S - 2 - 6 - F - CN - W - SW SS = Complete cooler in stainless steel Connection type NPT = SAE = S SAE flange = F BSPP = M SW = Seawater SWBZ = Seawater End cap gunmetal + zinc anode SS = End cap stainless Unit size From unit size 2400 small cut = S large cut = L Tube sheet W = naval brass SS = Stainless steel Baffle spacing in inches Tube diamete 10 mm = 6 6,4 mm = 4 Tubes CN = Copper-nickel CU = Copper SS = Stainless steel Technical data Maximum flow rate (GPM) Unit Size Tubes (water) Maximum heat load (HP) Four...

Open the catalog to page 4