Maximum flow ranges from Max pressure Temperature range UNIVERSAL Flow Monitors ® Vortex Shedding Flowmeter Description These vortex shedding flowmeters are designed for water and low viscosity fluids like coolant with the following features. · PROFINET protocol for flow rate, set point and status · Digital LCD display of flow, set point and status. · LED status lights · No moving parts to clog or wear Material Specifications Flow bodies of brass or 316 Stainless Steel with PVDF sensors and Viton® seals standard. PEEK sensors used for high temp for fluids above 150° F. Instrument Specifications • Flow Visual readout: 4 digit LED Deadband for Alarm: 5% of full scale (maximum flow) Accuracy: ±2% of full scale (maximum flow). Repeatability: ±.25% of indicated flow. Turndown (ratio of max to minimum flow rates): 10:1 at all temperatures and 20:1 available optionally for standard temperatures. • Pressure 300 PSIG (20 Bar) operating pressure • Response time 60 ms flow status, 450 ms for change in flow • General Fluid temperature limits: 35-150° F (2-66° C) standard, 150-210° F (66-99° C) optional 3 wire units only. • Pipe Connections: Female NPT, BSPP & BSPT • Back pressure of 10 PSIG required • 100 Mbit/s • Dual RJ45 ports • Fast Start Up (FSU) compatible Viton® is a registered trademark for DuPont Performance Elastomers.

Select the appropriate symbols to build a model code: ** Use schedule 40 pipe only Pressure Drop PRESSURE DROP (PSID) INSTALLATION DRAWINGS C - APPROXIMATE SWING RADIUS Universal Flow Monitors, Inc. 1755 E. Nine Mile Road • P Box 249 • Hazel Park, MI 48030 .O. Tel: 248-542-9635 • Fax: 248-398-4274 www.flowmeters.com