UNM50 UNIVERSAL Power clamps with hand lever conforming to NAAMS Standard 1 Series UN = UNIVERSAL Power clamps conforming to NAAMS Standard fully adjustable opening angle: 0° to 135° Max 2 Version M = Pneumatic with hand lever 5 Square shaft R = Right side only L = Left side only N = Both sides 6 Sensor N = No sensor (with protection plate) E = Electronic sensor with M12 swivel connector UNIVER GROUP

UNIVERSAL Pneumatic clamp with manual lever * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : THE MEASURES REFER TO NAAMS STANDARD *** : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides

UNIVERSAL Pneumatic clamp with manual lever * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : THE MEASURES REFER TO NAAMS STANDARD *** : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides

* : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : THE MEASURES REFER TO NAAMS STANDARD *** : AREA TO ACCES ANGLE ADJUSTMENT **** : DIMENSIONS TO BE RESPECTED IN CASE OTHER MANUAL LEVERS ARE USED Subject to technical modifications without notice MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable With manual lever Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides