UGP40 UNIVERSAL Gripper units for assembly UG = UNIVERSAL Gripper Units for assembly fully adjustable opening angle: 0° to 95° Max The opening angle range may vary according to the jaw position and style B = Double opening; two-tip jaws available only for vertical jaw position F = Double opening; one-tip jaws available only for vertical jaw position L = Single opening; two-tip jaws H = Double opening; no tips available only for vertical jaw position 6 Sensor N = No sensor (with protection plate) E = Electronic sensor with M12 swivel connector 7 Jaw material S = Steel jaws (if not specified, jaws are supplied in alluminium) UNIVER GROUP

UNIVERSAL Gripper unit for assembly MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 53° Horizontal arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCESS ANGLE ADJUSTMENT Subject to technical modifications without notice

UNIVERSAL Gripper unit for assembly MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 77° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCESS ANGLE ADJUSTMENT Subject to technical modifications without notice

UNIVERSAL Gripper unit for assembly MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 77° Vertical arm mount position With steel arms Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCESS ANGLE ADJUSTMENT Subject to technical modifications without notice

UNIVERSAL Gripper unit for assembly MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 77° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 * * : AREA TO ACCESS ANGLE ADJUSTMENT Subject to technical modifications without notice

UNIVERSAL Gripper unit for assembly MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 77° Vertical arm mount position With steel arms Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 * * : AREA TO ACCESS ANGLE ADJUSTMENT Subject to technical modifications without notice

UNIVERSAL Gripper unit for assembly MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 77° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 * * : AREA TO ACCESS ANGLE ADJUSTMENT Subject to technical modifications without notice

UNIVERSAL Gripper unit for assembly MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 77° Vertical arm mount position Whith steel arms Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 * * : AREA TO ACCESS ANGLE ADJUSTMENT Subject to technical modifications without notice

UNIVERSAL Gripper unit for assembly MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 95° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 * * : AREA TO ACCESS ANGLE ADJUSTMENT Subject to technical modifications without notice

MinVmax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 95° Vertical arm mount position With steel arms Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 * * : AREA TO ACCESS ANGLE ADJUSTMENT Subject to technical modifications without notice