UDP40 UNIVERSAL Power clamps with double arm 1 Series UD = UNIVERSAL Power clamps with double arm fully adjustable opening angle: 0° to 180° Max The opening angle range may vary according to the arm position and style UNIVER GROUP 5 Arm style A = Central, 10 mm offset B = Right, 10 mm offset G = Left, 10 mm offset C = Central, 15 mm offset D = Right, 15 mm offset S = Left, 15 mm offset E = Central, 45 mm offset F = Right, 45 mm offset L = Left, 45 mm offset N = No arm 6 Sensor N = No sensor (with protection plate) E = Electronic sensor with M12 swivel connector

UNIVERSAL Pneumatic clamp MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 * * : AREA TO ACCESS ANGLE ADJUSTMENT Subject to technical modification without notice.

UNIVERSAL Pneumatic clamp MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 90° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 **: AREA TO ACCESS ANGLE ADJUSTMENT Subject to technical modification without notice.

UNIVERSAL Pneumatic clamp arms at 10 mm from pivot point MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 90° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 **: AREA TO ACCESS ANGLE ADJUSTMENT Subject to technical modification without notice.

UNIVERSAL Pneumatic clamp arms at 45 mm from pivot point MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 70° Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWEL HOLES ± 0.02, TO SCREW HOLES ± 0.1 **: AREA TO ACCESS ANGLE ADJUSTMENT Subject to technical modification without notice.