UBT40 UNIVERSAL Power clamps UB = UNIVERSAL Power clamp T = Pneumatic with central fully adjustable opening angle: 0° to 135° manual lever The opening angle range may vary according to the arm position and style UNIVER GROUP = Central, 15 mm offset (standard) = Right, 15 mm offset (standard) = Left, 15 mm offset (standard) = No arm = Central, 45mm offset = Right, 45mm offset = Left, 45mm offset = Central, oversize dowel holes Ø 8 H7, 15 mm offset Y = Right, oversize dowel holes Ø 8 H7, 15 mm offset Z = Left, oversize dowel holes Ø 8 H7, 15 mm offset 6 Sensor N = No sensor (with protection plate) E = Electronic sensor with M12 swivel connector D = Pneumatic sensor

MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modifications without notice

UNIVERSAL Pneumatic clamp MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Horizontal arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT *** : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modification without notice.

UNIVERSAL Pneumatic clamp arm at 45 mm from pivot point * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT *** : AREA TO ACCES ANGLE ADJUSTMENT MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Horizontal arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modification without notice.

MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modification without notice.

UNIVERSAL Pneumatic clamp arm at 45 mm from pivot point MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 125° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modification without notice.