UBQ63_UNIVERSAL Power clamps
6Pages

{{requestButtons}}

Catalog excerpts

UBQ63_UNIVERSAL Power clamps - 1

UBQ63 UNIVERSAL Power clamps UB = UNIVERSAL Power clamps fully adjustable opening angle: 0° to 135° Max Q = Pneumatic with manual lever The opening angle range may vary according to the arm position and style UNIVER GROUP = Central, 15 mm offset (standard) N = No sensor = Right, 15 mm offset (standard) (with protection plate) = Left, 15 mm offset (standard) E = Electronic sensor with M12 = Central, 45mm offset swivel connector = Right, 45mm offset D = Pneumatic sensor = Left, 45mm offset = No arm = Central, oversized dowel holes Ø 8 H7, 15 mm offset = Right, oversized dowel holes Ø 8 H7, 15 mm offset = Left, oversized dowel holes Ø 8 H7, 15 mm offset T = Central, oversized dowel holes Ø 8 H7, 45 mm offset U = Right, oversized dowel holes Ø 8 H7, 45 mm offset V = Left, oversized dowel holes Ø 8 H7, 45 mm offset Automotive NW_Rev.

Open the catalog to page 1
UBQ63_UNIVERSAL Power clamps - 2

UNIVERSAL Pneumatic clamp Min./Max. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT Subject to technical modifications without notice

Open the catalog to page 2
UBQ63_UNIVERSAL Power clamps - 3

Min./Max. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° Horizontal arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modifications without notice

Open the catalog to page 3
UBQ63_UNIVERSAL Power clamps - 4

Min./Max. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° Horizontal arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modifications without notice

Open the catalog to page 4
UBQ63_UNIVERSAL Power clamps - 5

UNIVERSAL Pneumatic clamp Min./Max. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modifications without notice

Open the catalog to page 5
UBQ63_UNIVERSAL Power clamps - 6

UNIVERSAL Pneumatic clamp at 45 mm from pivot point MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modifications without notice

Open the catalog to page 6

All UNIVER Group catalogs and technical brochures

  1. JLE

    5 Pages

  2. HZRS

    2 Pages

  3. HZ9N

    1 Pages

  4. HE/HF tubes

    1 Pages

  5. PRODUCT RANGE

    44 Pages

  6. NEWS 2017-2018

    32 Pages

  7. NEWS 2016

    16 Pages

  8. Product range

    44 Pages

  9. NEWS 2017

    32 Pages

  10. Valves

    210 Pages

  11. PRODUCT RANGE

    32 Pages

  12. RISERS

    4 Pages

  13. M series

    1 Pages

  14. POWER PIVOTS

    2 Pages

  15. PIN CLAMPS

    2 Pages

  16. CLAMPS

    2 Pages

  17. ACCESSORIES

    54 Pages

  18. AIR TREATMENT

    14 Pages

  19. HIGH TECH

    75 Pages

  20. CYLINDERS

    67 Pages

  21. fittings

    36 Pages