UBP80 Unità di bloccaggio UNIVERSAL UB = Unità di bloccaggio UNIVERSAL con regolazione continua angolo d’apertura da: 0° a 135° Max L’angolo di apertura può variare a seconda della posizione e della tipologia del pressore 5 Tipo di pressore N = Senza pressore = Centrale, 20 mm offset N = Senza sensore = Destro, 20 mm offset (con piastra di chiusura) = Sinistro, 20 mm offset E = Sensore elettronico con = Centrale, 45 mm offset connettore M12 orientabile = Destro, 45 mm offset = Sinistro, 45 mm offset = Senza pressore = Centrale con fori maggiorati Ø 8 H7, 20 mm offset = Destro con fori maggiorati Ø H7, 20 mm offset = Sinistro con fori maggiorati Ø 8 H7, 20 mm offset Disponibile versione doppio pressore UBP80ODPE - UBP80VDPE UNIVER GROUP

UNIVERSAL Pneumatic clamp * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCES ANGLE ADJUSTMENT MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modifications without notice

Oversize dowel holes UNIVERSAL Pneumatic clamp MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° Horizontal arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCESS ANGLE ADJUSTMENT. Subject to technical modifications without notice

UNIVERSAL Pneumatic clamp arm at 45 mm from pivot point (arm style E-L-F) * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT *** : AREA TO ACCES ANGLE ADJUSTMENT MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 125° Horizontal arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modifications without notice

UNIVERSAL Pneumatic clamp MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° Horizontal arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCESS ANGLE ADJUSTMENT. Subject to technical modifications without notice

UNIVERSAL Pneumatic clamp MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCESS ANGLE ADJUSTMENT. Subject to technical modifications without notice

UNIVERSAL Pneumatic clamp arm at 45 mm from pivot point (arm style E-L-F) * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modifications without notice

MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCESS ANGLE ADJUSTMENT. Subject to technical modifications without notice