Catalogs >
UNIVER Group >
UBP63_UNIVERSAL Power clamps

UBP63_UNIVERSAL Power clamps
6Pages

Catalog excerpts

UBP63 UNIVERSAL Power clamps UB = UNIVERSAL power clamps fully adjustable opening angle: 0° to 135° Max The opening angle range may vary according to the arm position and style UNIVER GROUP N = No sensor C = Central , 15 mm offset (with protection plate) D = Right, 15 mm offset E = Electronic sensor with M12 S = Left, 15 mm offset swivel connector E = Central, 45 mm offset D = Pneumatic sensor F = Right, 45 mm offset L = Left, 45 mm offset N = No arm X = Central, oversized dowel holes Ø 8 H7, 15 mm offset Y = Right, oversized dowel holes Ø 8 H7, 15 mm offset Z = Left, oversized dowel holes Ø 8 H7, 15 mm offset T = Central, oversized dowel holes Ø 8 H7, 45 mm offset U = Right, oversized dowel holes Ø 8 H7, 45 mm offset V = Left, oversized dowel holes Ø 8 H7, 45 mm offset Automotive NW_Rev.

Open the catalog to page 1

UNIVERSAL Pneumatic clamp MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modifications without notice

Open the catalog to page 2

Oversize dowel holes UNIVERSAL Pneumatic clamp MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 105° Horizontal arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modifications without notice

Open the catalog to page 3

UNIVERSAL Pneumatic clamp MinvMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Horizontal arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT *** : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modifications without notice

Open the catalog to page 4

UNIVERSAL Pneumatic clamp Oversize dowel holes MinVMax. operating pressure: 0 ,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT Subject to technical modifications without notice

Open the catalog to page 5

UNIVERSAL Pneumatic clamp arm at 45 mm from pivot point Oversize dowel holes * : TOLERANCE BETWEEN DOWELS ± 0.02, TO SCREW HOLES ± 0.1 ** : TOLERANCE AT 80 mm FROM PIVOT POINT * * * : AREA TO ACCES ANGLE ADJUSTMENT MinVMax. operating pressure: 0,4 / 0,6 MPa Opening angle: adjustable from 0° to 135° Vertical arm mount position Electronic sensor with M12 swivel connector that can be orientated at 0°or 90° Pneumatic ports on both sides Subject to technical modifications without notice

Open the catalog to page 6

UBP63_UNIVERSAL Power clamps 6Pages

Catalog excerpts

All UNIVER Group catalogs and technical brochures

UBP63_UNIVERSAL Power clamps
6Pages